Search results for query: *

You want 2k primer to set for at least 2 weeks to get the shrinkage out of it. Yes longer it sets the better before sanding.

I keep forgetting that I have a set of those David Wise books. He says bare steel for the clamps and hangers. Bolts for the hangers and the dual exhaust hanger plate that goes thur the floor are black metal oxide. Plate welded to the body painted same as car.

Ok for the hangers, are the standard exhaust clamp the same?

Hi, on a factory exhaust clamp what would the finish have been In 68? I see some of the reproduction systems out there have bare steel and others have nickel plated. Which would be correct? Thanks!

Thanks for all the comments and likes! Been working on the car a bit by adjusting the brackets at the corner of the hood to get it all set. But then I got the flu and knocked me down for a bit. Really excited that I ordered my exhaust system and it showed up the other day. Wish the car was...

Tac?

Ok thanks

@dadsbee thanks! What manual is that from?

My car came without any wiring. Trying to understand the path of reverse wire path down to the trans. ECS has the reverse light harness brackets (pic below). Can someone help out with the location of these on the car. I didn't see them when replacing the metal or note their locations. Or...

Thanks all. Sounds unanimous to keep it open. Will do!

Hi, while getting parts together to rebuild my 68 440 HP I'm trying to decide if I should block off the exhaust crossover or not. My car is a 68 Charter RT 440 HP 4spd 3:54 Dana. Will be going all factory from front to rear. Living in the Detroit area and will plan on driving the car April...

I work in the building industry. Polished concrete is super durable and low maintenance. But with only 1,000 sf you might be too small of a job to get a contractor to come out and polish. Concrete for polishing needs to be placed really flat to get it to come out correct or they will be...

Hi Gang, While readjusting a few things on the front of my 68 Charger I had to cut the L bracket from the inner fender to the radiator support (66-68) free from the inner fender. I must have welded the snot out of it when I initially welded them together since I destroyed that part of the inner...

@robert horman

Excellent! Thanks

I went thru my stash and what do you know I found those brackets! Like the song says, "oh what a feeling"! Made my day. Thanks again for letting me know what they look like. Which one goes where?

Thanks!

Good for you! What do the brackets that support the ac line over the intake look like? Might need those for mine. Don't think I have any. Thanks

Nice work! Keep it up.

Awesome! I spent about the last 5-6 years of my career on the CH47D in the 185th aviation . Beastmasters! Awesome aircraft. Most of my time in maintenance and as a TI. Great times!