Search results for query: *

Here are two more.

I have these two right now Expire 4/13/25. If you use one reply that is it gone.

If you want to get an exhaust over that axle you're gonna need that out of the way anyway most likely

I am using a Dana axle and mine did not clear.I had to cut that upper shock mount out of the way

You guys are all correct about the boost. I am rebuiulding this Hemi for NA. It is going in a different car when rebuilt. What I know about how it failed. Blame it on the tune, yes. They did pull timing, it was at 26°. They did not tune the carb. Not even an AFR guage in the car. AFR at WOT was...

I have the Hemi dissasembled. Trying to diagnose the failure. I bought it in running in a car this way. I have no history of what happened to it. It was running with three down holes, and it had an F1 procharger on it. Getting it apart we found three broke piston top rings and lands. Sent the...

Thanks for the help.

Nothing is easy. Called Crower and they have no cam cores. Dont know when they will get some. The Crower springs 68340-16, that go with the 32242 cam are not in stock either. Which brings up spring idea questions; 1. Crower says to use their spring 68340-16. spec at 359# rate, 119# on the...

I was hoping you would chime in. Yea, I beleive valve springs is the issue. Sympton is below. I talked with three cam companys yesterday, and this is what they each suggest. >Comp; K21-224-4 233/236 Duration, 488/491 lift, 110 LSA. And they have a kit with cam, springs, keepers and locks, and...

Time to get the teeny cam and valve springs out and put in something that belongs there. When I put this 440 together it was just supposed to be temporary since the engine in the car was hurt. Well, now it is going to stay. What it is; 69 Road Runner convertible 1976 440 truck engine, iron...

Idles in mid 13 range cruises high13 to low 14. Give it the beans and it is in the low 12's as rpm climbs, then high 11's. Plugs are clean. Timing color change is still above the center electrode. Running the fbo box and their coil. Stock pistons. Ring gaps are at the high end for boosted...

Low compression 1976 440. Has been rebuilt using stock pistons, new rings and bearings. 452 heads with unknown springs. It has a smallish Comp XE256H cam, 212/218 @50, .447/.455, 110LSA. I had this cam and lifters so they went in the engine. The car this engine went in has an F1 Procharger in...

I have had 3, 73 Chargers, and a 72 Satellite all console cars and none of them have had that strap.

I asked the painter to do the center resessed section of the hood in black. Not sure on the stripe over the roof.

The reason for this post is, the body goes to the painter next month and I still dont know what color to tell him. B5 is a great color in my opinion, but, there are just so many of them. Q5, another great color, not blue and not green, both I guess, and you dont see any. I recently found K6...

Just for kicks, this is how I found this car.

I am building a 72 SSP. Not a stock build at all. Tunnel ram with dual quad EFI sitting above the hood. Stock ride height on QA1 suspension. Full interior in black. The car was roginally yellow with the gray lower portion below the SSP trim and white interior white vinyl top. That is all...

Between K6 Autumn Bronze Poly, Q5 Coral Turquoise Poly, or B5 True Blue Poly. Which one is the coolest color?

Sold

Video of the Belvedere.