Search results for query: *

Do Mopar oil filter's have a date code? what is the shelf like on a filter? Stored in cellar with a dehumidifier? 04884899AC BLACK.

Question on the correct style cast alu tail light housing. Does the 69 housing have the small or the large eye brow over the bulb socket? I have one of each in my car. Thanks

I am going this weekend to look at a Daytona rear glass and trim? Pc's he sent looks ok? Could be a vega piece? So my question is if it is a real piece of rear glass and trim what do you think the value would be? thanks

Putting the nose on my Daytona prior body work and paint. Was wondering what the nose gap would ruffly be? 5/8" or 3/4"? thanks

Looking on converting my 69 Charger to a 4 speed. Have all the parts, but need info on locating the clutch bell crank bracket. The engine is not installed so I have plenty of room to work. i found the bracket, but no measurements on location included. Thanks for all the help. looking on...

Looking for a heater control panel light bar for a non a/c, heater only setup

My lower dash pads have the common issue of foam separation from the metal. Not that bad just need to re glue? Was wondering if anyone has had any luck with re gluing? what glue or adhesive would be best? Thanks

good evening, i need a turn signal switch for my 69 Charger. I have heard that some of the switches available have some issues and need some work. Was wondering what brand to buy, or who to buy from? Thanks

This setup was in a box ox parts for a 69 charger I purchased a while back. Trying to identify the wires and connectors. So my is there is a 2 wire, colors 1 pink and 2nd redish orange ? about 62" long. the pink wire is connected to the pink wire connector on the back of the fuse box, see...

Looking for some parts for my 69 charger, Need a no A/C dash control assembly, non a/c heater box, 2 speed wiper and a 4 speed shifter with no handle .

my 69 Charger has no booster and MC when I got it. So was wondering what style of setup, Factory or Hydroboost, ect gives the best braking? Thanks, Factory front disc and drum rear

I should for also ask does anyone also know what is the correct slip yoke needed for the 69 charger 440 4 speed Charger.

Was wondering if anyone knows where I can find what length drive shaft I need? 69 Charger 440 / 4 speed with a Dana. Thanks

Was wondering if anyone has purchased a reproduction 5 pc dash bezel kit for a 69 charger? Are they any good ? Quality? I don't have all the pc's

My gauges on my 69 Charger need help. Rally setup with tic-tok. Should I get them all(6) rebuild? Or are the OER gauges for $900.00 and good ? Or are they NG and only last a few years? I would think it would be more $ to rebuild them as to buying new. Thanks

looking for a correct brake booster for a 69 Charger, need a master cylinder also? Thanks

Anyone know the correct part number for a throw out bearing for a Charger 4 speed?

New , never used or installed is this 143 tooth alu 8 hole flywheel, weight is 14 lbs. Part numbers on box are 564500 Flywheel, Also comes with instruction sheet, Asking $325 plus shipping

I have a 2010 6.1 manual transmission set. When I did the install in 2011 I used the Mopar performance plug and play setup. the charging system was fine. So 6 months ago I decided to get a better system that could be tune and make the engine run better with todays technology. Purchased a Holley...

Looking for a 1969 # 6348 alu shifter mounting plate for a 4 speed, thanks