Search results for query: *

wondering if they are the same plz help I found a wheel tire combo I like but it’s on a 69 charger

Ok ty

Gotcha I'm looking to sell local if able and sell heads crank rods and all in one batch

A new forged 440 crank is 700 Or better can't imagin a stock crank with spun bearings being 150 can be turned more than once

Biggest problem I have now is even after putting the XHD Springs in it doesn't want to hook up with 275/60/15 sportsman street tires think I need to swap to the Mickey as street radial equivalent would like to go bigger but I know 275/60/15 fits atm

I am using the block it was refreshed and bored 30 over and clearanced before dropping the 522 stroker assembly in

Block is year correct 1970 not sure about the internals crank is forged and rods are stamped ly

sorry if this is not the right forum I can delete and repost. I have a complete rotating assembly forged 440 crank ly rods, pistons 457 head? With rockers and shafts. # 1 bearing spun and 2 is scored but all bearings were stamped std. what is the whole setup worth? I don't need because I put a...

I'll try some aviation fuel and see how it likes it it is sposes to run off non octane premium fine but I can see it being an issue

What should idle be 1k or less?

Motor is 70 440 block 35 overbore forged and balanced 512 stroker 10.5/1 compression with aluminum heads comp cams 577/588 solid mechanical roller, 1.6 roller rockers and roller lifters. Msd mechanical advance with original springs as recommended by msd and msd 6al2 ignition system and...

True

Haven't tried in gear idle is set at about 5-700

Should I do a vacume tune at temp or will it matter with a mechanical advance msd

Set timing to card spec at temp

Also it is a mechanical advance

Hey all I recently rebuilt my 440 6 pack and dropped a 512 striker aluminum heads and solid roller tuned it to what the cam said and after running it on a long drive it diesels when shutting off... is this a timing issue? Any help or direction is appreciated. Also I was told to adjust the timing...

What year Coronet Satalite charger ext shares same wheel well size etc is 68 and 70 Coronet same ext

That's why I am asking I have same rim and tire but need bigger with a drag radial new motor is 625hp rwhp and 732pnds tourque and no traction with street tires