Search results for query: *

I have a 1970-71 Big Block LH exhaust manifold casting 2951865. The date code is 4.22.71. Price is $250 plus shipping within the U.S. and Canada.

Thanks. I asked because the spec shows it still exceeds the Edelbrock recommendation of 6.0 psi.

No regulator. Just the pump.

I have an Edelbrock AVS on my freshly built 440. Edelbrock specifies a regulator if pressure exceeds 6.5 psi. I rifled through my files and found that the Carter mechanical pump I have produces 8.5 psi. Several people I spoke to thought it was odd that a regulator would be required with this...

That’s what I’m considering to be safe.

A lot of reinforcing ideas. I’ll keep plodding along and check the lifters, compression, etc.

Oil pressure very good. Reliable gauge in place of the sender for startup. A local Mopar racer said it was ok to use heavier oil at startup.

Some slop between the rockers too.

Flat tappet cam. Builder lubed everything during assembly. I used VR1 with zinc additive for startup.

My 440 was rebuilt years ago. I finally got to a point of starting it for cam break-in. Valve train clatter is excessive. It has adjustable rockers. I checked and adjusted preload. It is a bit better but still excessive. This is my first rebuilt engine break-in. Any recommendations from the...

I have a set of bucket seat floor reinforcement plates. Price is $20 plus shipping from Milford, MI 48381.

I have a very nice 1968 Road Runner Sparton Horn. It works as it should because I tested it with a 12v power supply. The paint is also very nice. It looks as if it was installed then removed quickly because signs of age and wear are minimal. Price is $100 plus shipping from Milford, MI 48381...

I think 1968 was the first year to use the turn signal lever for the cruise.

Do you have a pic of your connector?

This is a used 1970 B-Body style cruise control turn signal lever. It will work on other models and years. - Tested and works. - Lever has been painted. The original silver plating (not chrome) was mildly rusty. - Black plastic is in very nice condition. - Chrome barrel is in good condition but...

Inbox full. Send me your address. I’ll take 10.

I’m in Milford Mich too. I can pick them up directly.

PM sent. I’m in Milford.

I have a very nice used working 1968 style Road Runner horn that is: - OEM - Long Bracket - Black - SPARTON - MODEL SA - MADE IN U.S.A. - Date Code 218 I tested it with a 12v power source. It is extremely clean with no rust. The paint is not perfect. It is fine “as is” for a nice driver or...

I have a used 1970+ LA engine heater hose bracket. The plastic coating is incredibly nice and it has some minor corrosion on the bracket. The condition of this bracket will be right at home in the engine compartment of a driver. $10 plus cost to mail. [