Search results for query: *

Does anyone have Frank Badalsons web site to purchase engine paint. A google search doesn’t turn it up

A few years back, there was a guy that was popular on this page for rebuilding break cylinders. He was out of Fort Worth Texas and had some videos on YouTube. What was his name?

I believe I need to change the driver side motor mount but I have questions. I want to roll the engine to the right by jacking up the left side by the dust cover. Do the bolts on the right have to be loosened or off? Do I take out the entire bracket the mount attaches to… the one that bolts to...

I’m looking for the breather hose for a RamCharger 69 Bee/383… from oval air cleaner to left side cap. Do they sell repros? If not then what is the length of that hose?

So I recently purchased these after having to replace the inner axle seal I originally had a company in Ft Worth do the axle during the resto process. I believe it was put together wrong. The metal gasket was on the outboard side of the backing plate in between the axle assembly Doesn’t it go...

This is my distribution block for my brakes. I have a slight leak somewhere on the block. The area circled in the pic is where the wire hooks up. If you take the small jam nut off that holds the black spacer in place the small threaded rod just spins. Is that normal? Is there the possibility of...

What is the best rattle can color/brand for the 69 Bee oval air cleaner

I have an after market tank with an in tank fuel pump and have never hooked up the vent lines. I’m trying to finish a few things up before she gets put up for sale. If I’m filling my tank and fuel is coming out of one of the rubber fuel lines currently connected, should that be the one that gets...

I have an after market tank with an in tank fuel pump and have never hooked up the vent lines. I’m trying to finish a few things up before she gets put up for sale. If I’m filling my tank and fuel is coming out of one of the rubber fuel lines currently connected, should that be the one that gets...

Who makes the best wheel well mouldings? The after market ones I bought 4 years ago are way off. Looking for accuracy of bends. For a 69 Bee

I am finall going to pull the trigger on a set of 17x8 TorqueThrust rims. For the rear, do you want a positive or negative offset? The pic shows the 3 choices available. For a 69 Bee.

Which way does the seal go on with disk brakes? It’s a red seal with a soft black rubber seal. I bought these from Doctor Diff. He says the 2nd pic is correct. The first pic is a screen shot from The Ram Mans video. It’s already on the spindle and that would mean the last pic is correct...

69 Super Bee with Torque Thrust rims I am going with a 17” tire and I am opting for more profile than I am width. Front... 215/55/17 on 7” rim Rear... 235/55/17 on a 8” rim Any thoughts on backspacing as well. ALL COMMENTS WELCOMED.

I’m surprised I’m doing this but I am moving from Texas to Missouri. I thought about hauling the car on a Penske trailer but the weather up there is still blah. Who do you guys recommend for enclosed transport of my Bee?

Is this normal??? Look at the left side compared to the right and how much rubber is exposed between the lip and the outer frame. The left has about an extra inch of rubber before the lip starts. In the full pic it all looks off center

I have the slightest hesitation(lean) from idle to wot. I’ve been working with the opening of the secondaries and I believe it’s where it needs to be as well as jet size and pump nozzle size.I have 14hg of vac, which tells me I need a #7 power valve. Some would say subtract 1.5hg then divide...

Do you run the same brand of tire on the front and rear? Example... Nitto on the rear with a BF GoodRich on the front. I’ve read the threads and checked out a number of different sizes for 15”,16” and 17” rims and the only thing I can decide on is the selection sucks. It gets better at 17” but...

If you are trying to set your carb up with full manifold vacuum, make siure you know what port to hook it up to. I set it up based on the instructions provided before I realized something wasn’t correct. I had 14 hg measured on the intake but nothing on the port. The vacuum increased on the...

I am considering a 17" rim but I don't like the look when the profile is to small. Take into consideration the max tire diameter for a 69 Bee (from my search, 27" for the front). 215/55R17 = 26.3x8.5R17 4.65" profile 225/55R17 = 26.7x8.9R17 4.85" profile 215/60R17 = 27.2x8.5R17 5.1" profile...