Search results for query: *

Hey folks, I figured being a bunch of Mopar nuts I had to share my recent experience with Dodge. As many already know I have bought Dodge vehicles since I got my drivers license. So it shouldn't have been a surprise for anyone that I recently purchased a used 2013 Durango. Sometime after...

So now that I have 8,000 miles on this combination all of a sudden I started getting a drive line vibration on deceleration. It is the worst if you push in the clutch and remove all load. Makes very little to no vibration under cruise or acceleration and vibrates under coast. Before you say...

Hey guys, I tried searching but for the life of me can't find the post. There is a member on here that makes new replacement badges for the 60's era cars...specifically made a 345 Hemi badge instead of the 426. Now that I have moved away from the sleeper look a bit I'd like to swap the v8...

I just wanted to give a shout out to those on here that have been an inspiration to me over the past 3 years. I won't name names for the sake of forgetting anybody but you know who you are. The time has come because of some of lifes curveballs that I have to sell my car. I consider many of...

Now that my car is much closer to completion I have been thinking about my insured value of the Coronet. Hagerty doesn't have a way to really apply a decent value and I am not sure what the car is worth in today's market. Can you guys help give me a ball park of what you think it's market...

http://greenbay.craigslist.org/cto/4501611112.html I don't understand why....but really?!

Ok guys. I have been thinking about this for a while and seem to be having a harder time then I would have figured. Sometime this year the Coronet is going to need some new shoes and I have been thinking 235/60 R15 fronts and 255/60 R15 rears. The problem is nobody seems to have these sizes...

Well not that most of you guys care about where I am located but for those that are keeping track I will be making a move. Picking up roots here in NW Indiana and moving to the Green Bay area of Wisconsin. Lucked out and have an opportunity to work with Cummins and can't pass it up. If...

So since the Coronet is up in the north woods awaiting its turn in the paint booth I got bored and decided I needed to buy another Mopar. (well worked out that way anyway). Basically I got tired of spending $300 driving the truck to work and wanted to start saving gas. So I picked up a 2002...

I have been doing some research lately on windshield gaskets and have a couple of times seen where people say the 66-67 2 and 4 door sedans use the same windshield and gaskets as the 68-70 sedans. Can anybody confirm this with an interchange book? If this is true it will allow me to buy a...

Ok so I decided it was time to spend some deserving time on the Ram doing some maintenance. Decided to change all of the fluids in the diffs and T-case. Upon opening up the rear end (2004 Ram 1500 Hemi, 9 1/4 rear with factory posi) I found this part stuck to the magnet. I have no idea where...

Anybody know where I can get a new windshield gasket for my 67 Coronet 2 Door Sedan? I haven't figured out who makes one yet and I need to bring one with me when I drop the car off for paint. Any help is appreciated. If you have one...I may be interested as well.

Ok so I am piecing a system together for my 67 Coronet and bought the Flowmaster tail pipes #15806 The problem I am having is I cannot seem to get them to sit properly under the car. They will sit at an angle if I get the front end by the axle in the proper place and if I attempt to get the...

http://www.ebay.com/itm/Complete-Ready-to-Run-Dodge-Mopar-R5P7-Engine-LOW-RESERVE-/261205004064?pt=US_Radio_Control_Control_Line&hash=item3cd1080f20 This looks like one hell of an engine for a good price. Friend of mine just sent me the posting from another page.

Ok guys here is the rub. I am losing confidence in my ability to sand and block my car to make the paint come out good. (mostly due to not having a garage to do any of this work in) 1st...its not a show car, just a nice driver and the paint is an inexpensive sealer and single stage color...

Guys, I am working on a rear disc brake conversion package for the 8 3/4 axle. Its an off the shelf rotor, caliper, pads, and seals, plus 2 brackets which I am making and are bolt on. You lose the parking brake since I am not using a stock setup here. The jist of my question here is, are...

Ok guys I need wisdom. I have read some of your guys posts about this over time but want an honest poll. So green bearings or stock tapered rollers? Some say the green bearings are weak and fail others proclaim the green bearings are the way to go. In case you haven't read the title, I am...

Your RockAuto discount code 111117958804119 will expire on November 4, 2012 For your use. Well for the limited time left. Gives 5% off when you put it in the "how did you hear about us" box.

I am looking for some insider information here or just a guy with some spare parts laying around. Here is the rub: I am putting a 2001 Dodge Dakota manual trans (NV3500) behind my 2003 5.7 Hemi. I have a flywheel from a 2003 2500 Ram with the NV4500 5-speed and was planning to use the Ram...

Well recently we bought a used Nissan and long story short got a lemon with a need for an engine. So since it wasn't too far gone yet we traded it in and I did my part to stimulate the american economy... Got a good price and so far I love the 3.6 pentastar v6. 283 hp is not bad:headbang: