Search results for query: *

I know this needs to go in the parts wanted section, but here goes. Someone used to make a hand made tool to adjust the rear carb a/f screws. Does anyone have one for sale or know where I can get one.

I'm having trouble adjusting the a/f ratio screws on the center carb. There is no difference when either side is adjusted. I can screw them all the way in & no change. So, what needs to be checked or fixed ?? I'm also getting 15 on the vacuum guage. And strong gas smell after shut down.

1970 440 six barrell. I needed to take the center carb off last nite. Of course one of the fuel inlets was turning when I was removing the fuel line. It's tough to get a wrench solidly on the inlet. Does Holley or someone make a tool for that occasion.

I need some pics of the carb linkage & spring set up of a six barrell set up. Must be an automatic trans set up. Thank You !! Also does anyone know where to get that little clip.

I got a 1970 440 + 6. Just finished new 440 Source aluminum heads. Car starts just fine. But when i give it some gas under load the engine sputters & wants to die. Choke seems to be working fine, I just checked & adjusted the floats. What else should I check to correct the problem. Could it be a...

I'm looking for a pix of the spring & throttle setup for a six barrell. I had mine off & am not sure i have it back on correctly. Any help is appreciated.

I just can't seem to mget my choke & fast idle set up properly. Stock 440 six barrell. New choke thermostat. Can someone explain how to adjust the choke setting & fast idle setting. I have the service manual, but just can't get it right.

I've trying to get my choke set properly. 70 RR 440 six barrell. When I start it up cold. I set the choke & get a small backfire thru the carb when i start it. Is the choke set to tight or is it open too much ??