Search results for query: *

Anyone out there know of a way to clean alcohol in gas out of a carburetor that only has a few hours on it without tear down?

Can't seem to find any hose flexible enough to snake into gas tank through filler neck to pump out old gas. Any ideas?

Has anyone tried their power blaster spacer?

Where would one look for air cleaner flexible intake hose?

Two holes at the bottom of the plenum beneath the primaries. Purpose?

Advice for cold air plumbing to a single four barrel to a 440 in a 63 b-body? Good parts source?

Anyone know the height difference between a stock 440 intake or ch4b and the performer RPM?

Using a mechanical pump on a 440 and using original 5/16 fuel line as a return. Thinking about using a filter with the return built in and also using the 5/16 line for a small electric pump to refill the carb on a hot soak. Any problem with connecting the the bypass line with the line from the...

Anyone out there try to stuff a dual quad long ram in a 62 to 65 b body with an rb mill? What type of problems did you encounter?

Anyone out there had a problem with ping while using an Edelbrock sp2p intake manifold?

Anyone out there know if an Edelbrock Performer manifold 4 a 440 can be milled down to fit a 383?

Anyone know if Edelbrock ever made an sp2p intake for an RB motor?

Has anyone out there tried using driver side all fittings on a Holley carb 4 fuel recirculation to the tank?

Anyone out there know what the deal is with Edelbrock and all these new changes they made?

Read somewhere that in order to make long ram system work as it should the cam must be retarded somewhat in the block. Anyone know something about this?

fuel filters w/ return nipple do these filters return liquid gas and gas vapor to the tank? I would like to do both but not sure how.

anyone out there know of a chemical to clean up a nasty carb without damaging the air bleeds? Stronger than carb cleaner that is.

I have heard that a fuel recirc. line can be used on the driver's side fuel bowl inlets on a 3310 if they are tapped for fittings to help dealing with hot weather conditions. Any one tried this?