Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have 2 wheels, looking to complete a set of them.
Need 4 domes and a set of original, capped lug nuts.
Will consider a set of 4. Please see the pics.
PM with what you have. Thank you.
Looking for a 3/8 pipe x 5/8 male flared fitting, 90 degree.
Has to look like the pic, with a rounded off corner.
Also looking to buy hose ends, both 3/8 and 5/8.
PM me here. Thanks.
I need the 1/2-13 x 3.75 size for the 66 - 68 B Body cars.
Black phosphate coated, and have the dog point tip (aka - pilot point)
Also need the nuts with the built in washers. I could use a few extra ones of those...
Yes, there are repos for under $25. a complete set of 4, but I'm keeping it...
Looking to buy some vintage 'ROCKALLOY" brand Grade 8 bolts in the sizes listed below.
They were cad. plated, when new. Need fine threads.
I'd buy NOS or decent used. Needed for my steering gear and sway bar links.
Let me know what you have and what you need for them.
PM please - thanks!
Looking to buy one NOS 1969 dodge sticker like this.
Must be original, not reproduction.
Check your stash of vintage stickers. Ask your buddies!
PM please. Thanks!
Looking for a set of 68 - 70 Dodge B body 2 dr. hardtop outside side glass weatherstrips (catwhiskers) in usable shape.
If you upgraded with new repro and you have an original, usable set, let me know. Thanks.
PM please.
***** FOUND THE OUTER DOOR PIECES ******
Just need the felts for the...
I'm looking to buy an original set of "A" pillar windshield moldings in any condition. These are the wide stainless moldings on each side of the windshield. Let me know what you have.
ALSO - need a pair of 500 or Daytona original trunk hinges.
PM please. Thanks.
I'm looking to buy an original set of "A" pillar windshield moldings in any condition. These are the wide stainless moldings on each side of the windshield. Let me know what you have. (not looking for reproductions) PM please. Thanks.
My 69 Charger had a plexiglass rear window in it with weatherstripping between it and the body. I just found out the brand, so I want to re-do it correctly.
I need 3/4" wide and 3/8" thick. At least a few rolls of NOS for a period correct restoration would work..
The photos below are what the...
Looking to buy NOS or used Goodyear industrial inner tubes, size: 2.80/2.50-4. (no other size or brand needed) I need 10 total for the Lockheed recorder black box used in the trunk of the #88 Charger Daytona. Please check out the photos. They are the size of large donuts!
These inner tubes...
Remember the small, white "Handling - What it is & How to get it" pamphlet by Addco?
They advertised in the Hot Rod magazines.
Looking for specs from the catalog for B bodies, 68 to 74.
Need the various bar sizes available and their respective ratings, in pounds per inch.
thanks.
WTB - I need 4 original 4 speed trans to bellhousing bolts and the serrated washers, like the photo. Needs to be original parts, not repop. Has to have the correct markings on the head.
Also need one original pass side interior door side glass weatherstrip (cat whisker) for a 2 door hardtop...
Please check your parts carbs. I just need one like the photo.
Its for a '69 Dominator, but maybe other carbs in that era used the same pump lever.
PM please. Thanks
Need a 66 b Body column with the l-o-n-g steering shaft for a manual box.
PM please, with length of shaft measured from the collapsed coupler to the nut that holds the wheel!
THANKS!!!
I need the inners and outers, both front doors and rear 1/4 glass weather strips for a 68, 69 or 70 Coronet 2 door hard top. I am looking for good used ORIGINAL parts, not repops. thanks.