Search results for query: *

Looking for a set of torsion bars for a big block 1971 Satellite. This is not my car but apparently my friend took it to an alignment shop and they said it needed torsion bars and lower control arms. I guess if anyone has these parts shoot me a price shipped to 30157 I may just rebuild the...

Looking for a good set of black head rests for a 69/Roadrunner. Let me know if you have a set. Thanks

Looking for decent set of HP manifolds. Let me know if you have a set with price. Heat riser does not need to function.

When trying to seal the windshield I bent the lower chrome and now its pretty tweaked and wont go back in place because its distorted. So Im looking for a nice set of lower pieces. I now have the ends to tie them down. Let me know if you have a set. Its 2 pieces. Thanks.

One of the case bolts that bolt the 2 halves together snapped off I was able to get the broken part out easy. So Im looking for 1 or 2 left handed thread case bolts. I dont want to buy a whole set for 65.00 from Dr.Diff. I just need 1 really. Let me know if you have one. That is all I lack to...

Hey guys looking for a complete taillight harness that goes through the body from the plug in the trunk. Or I need the plug from the taillight harness. The new M&H harness is fine I’m missing the rear connector.

Looking for a 2538933 Yellow Speedometer gear let me know if you have one and shipped to 30157. Thanks

I know I can buy new but wanted to see if anyone had a 1 groove water pump pulley and a 2 groove crank pulley. And a set of alternator brackets for a big block. They don't have to be pretty just usable. The car will have power steering so that's why I need the 2 groove crank pulley.I need pretty...

I have the passenger side valve cover and its in decent shape. The driver side I have is damaged and looks like it was kissed by a couple rocker arms. How is that even possible with a shaft style rocker arm assembly? Anyhow it should look like the bottom one in this picture. Let me know a price...

I have the pan and in decent shape But im looking for a pickup tube for the pan. I had it but apparently it grew legs and walked out the door.

Looking for the driver side piece of chrome for around the dash. Doesnt have to be perfect Just needs to not have rust holes through it. Here is a picture of the part I need. I am in the process of pulling the dash and would love to have this piece before I get ready to put it back in.

Not looking for a top notch wheel, but one that can be repaired. Both of the ones I have are not worth repairing. If anyone has one at a decent price that needs a few cracks fixed let me know. Otherwise I will be forced to stick a grant wheel on the car. Also It has to meet my budget.. Cheap

Still looking for this switch. Here is a picture of the old one. I know it has a 3 prong connector. But I have seen some with an extra wire coming off the switch with a single connector as well. It may be possible that its correct. has a part number of 137 2280 The wires were pulled off with the...

Looking for a good blower motor switch that mounts in the heater/ac control panel. If its in good used shape thats fine as long as it works.. Doesn't even have to be pretty. Let me know how much. The part number I found was 1372290 im not even sure thats correct. But this switch was broken to...

This car I am working on is missing all 4 marker lights and the grills. If anyone has them let me know. I need all 4 shoot me a pm with a price and shipping to 30157. Thanks

Trying to put this car back together but its missing a few things. The only portion of the linkage that is in the car is the rod that comes down off the column shifter. The rest is gone. This was a 383/727 car and I found some restored parts on ebay but they are high dollar. Just looking for...

I'm looking for the bracket that holds up the steering column to the dash. I bought one off the internet but its wrong. If anyone has this bracket let me know price plus shipping to 30157 It would help to have the mounting nuts and the plastic washer things. Also looking for the whole ashtray...

Looking for a bumper filler for a 66 Belle. The one that came with my car is trashed beyond repair. There will be more parts that I need but I am just currently seeking what major parts I'm missing. It doesn't have to be perfect just not twisted into a knot. Like the one I have is. Driver is ok...

Hey guys/girls I'm looking for a transmission cross member for a 66 Belvedere. If you have one let me know a price shipped to 30157 If it had the bolts that would be awesome too.

I bought a gas tank that has 4 vents coming out of the driver side and apparently its either the wrong tank or I am missing the separator. I found a picture on these forums of what Im looking for. If anyone can tell me where to locate one repop or OE either way. Thanks for the info in advance...