Search results for query: *

I need the threaded rods from the knobs down to the latch for my 68 Charge left and right. Please advise if you have these available. Tim

I need the clip or the rod that is used to shape the headliner where it goes around the bottom of the sail panel. The clip rusted out on my passenger side. Hopefully the pictures will help. Please advise if you have one. Tim

The shop is telling me the switch that goes onto the parking brake assembly is missing. It turns the dash brake light on. OEM number 2889053 Please let me know. Tim

Once again I find more parts the previous shop lost. I need the hood latch, release lever and safety catch for my 68. The hood catch is there, but I need everything else. Please let me know price and condition. I also need the pin switch the goes on the emergency brake pedal. This is used...

I had one back in the day and would like to find one. Pretty unlikely, but worth asking.

I'm buying a car in Prescott AZ. The tires on the car are dry rotted beyond use. The seller is trying to help, but can't find used tires. I need four wheels and tires to get this 70 Charger rolling to be shipped. Open to anything that close to the car. Please let me know. Tim

I had one when I was a kid, would like to find one in good to new condition. No idea where this 'model' came from lol. Tim

I need the upper stainless trim for my 68 charger. This is the long piece that runs across the rear panel. The rest of my trim is in nice shape, but I'll consider a set if need be. Thanks, Tim

Looking at going to aluminum heads on my 440, the stock heads I have are too expensive to save. Anyone have any nice used adjustable roller rocker arm sets or aluminum heads? I'm looking at 5093 Edelbrock E-Street heads, but adding rockers, hold downs, pushrods just gets past what I want to...

That was quick, just found one an hour from home. I have my engine apart for rebuilding, the machine shop can't take until Jan. I'd like to speed that up. Open to anything from stock to 400-500 HP range. Machined bare block is OK too. I don't need anything super high end, just so I can...

The PO on this car filled the front console plate with some ultra hard material and drilled some holes for something. The rest of the plates are salvagable, so nice used is preferred over reprop. Please let me know what you have any your price. Thanks, Tim

My Charger came with door interiors disassembled. The upper pads are there but no door cards. The stainless trim between the door cards and upper pads is missing for both sides. My interior guy can make cards, but I need this trim. Please email with what you have and your asking price...

I'm looking for a pair of LCA's with sway bar tabs for my 68 Charger. Any useable condition considered. Tim

Parts Located, thanks y'all... I need the front turn signal parking light housings. I'd prefer ready to install with unmolested holes. I have new lenses, but open to offers. Thanks, Tim

I need a couple of the flat headed retaining clips that hold the lense to the cluster housing. I can't seem to find these. Thanks, Tim

I need a few of the push clips that retain the lense to the instrument cluster housing. Can't seem to find these anywhere. Thanks, Tim

Some genius decided to ram some drywall screws through the lower corner pieces on the back window trim on my 68. I'd be interested in just the lower corners or the whole 5 piece set. Prefer used OEM to the aftermarket options. Email with your price and description. Thanks, Tim

Turns out my 'runs good' barn find 68 Charger has a cracked block the seller neglected to mention. It does run, just won't hold coolant. Anyway, I'm not looking for anything special or super HP, just a decent running big block I can drive around. Car was originally 383 2bbl. Thanks

Just rejoined the ranks with a 68 Charger 383 4v. It's missing the AC control panel in the dash and air cleaner. Also missing AM radio. Sure I'll find more, but is a start. Located in Austin tx. Let me know price and condition. Thanks, Tim