Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just looking for the trim piece that is missing from the right side tail light, see pic.
Anyone have a busted up tail light with the trim piece intact?
Not sure if left and right are interchangeable.
Not looking for an entire tail light, low low budget here.
Thank you FBBO.
You read that correctly, I'm looking for the worst '64 Plymouth grill, really just a small piece, to 'fix' my near perfect grill.
A bag of Ice Cream Salt, yes, was left on the bumper for 20 years and ate away a section of the grill, see pic.
Just looking for that small section to be cut out of...
I need it.
My dash in top pic, dash with it in lower pic.
Threaded piece, fits in squared off hole from the back, screws into chrome bezel, parking brake release rod goes through it.
I have a 62 Dart.
I need iirc 2 of the red clips, and iirc 6 of the other.
One of the other 6 is shown in the pics, first clipped up to hold the cardboard up, and next pulled down to show myself how it was installed.
The 2 trunk clips were originally grey to match the panels, but I didn't lose the 2 red ones for...
I need 1 clip, goes above the windshield, accepts the chrome screw for the metal trim.
I need the 2 piece clips that hold the hardboard headliner up. I have a few but need more.
I need 1 clip, possibly 2, attaches to the a-pillar, accepts chrome screw for the metal trim.
I removed multiple...
I have a 62 Dart.
Looking for cowl parts, rust free or possibly better than mine.
62-63 upper cowl should be the same, first pic of grill piece.
62-65, I believe, share the same top firewall piece and heater piece, not 100% sure.
My parts are in pics below, I'll fix if I have to but looking...
62 Dart, need upper control arm mounts and cam bolt eccentrics, for both sides.
Anyone want to cut these out, or send the eccentrics let me know.
Shock towers and frame rails are solid, pitted but solid. I beat them with a pick and screwdriver.
No idea how these rot out, but the mounts and...
Rear floor pan, under rear seat to trunk pan.
Roughly, lower 5 inches of the firewall, including the hump to the left of the column. Have a new floor, but the rust went up past the seam.
The bottom half of the heater intake mount.
Both upper control arm mounts. The shock towers and frame...
15x8, 3.5 backspace, 4.5 bolt pattern.
Got it with another wheel I needed, thought it was a factory Ford wheel but now not so sure.
It has a squared center, easy to see from rear, so looking for a match.
It doesn't have to be chrome, just have the same dimensions and the same center style...
Looking for just the 2 sections under the rear seat.
In the pic, they were covered by fiberglass and the floor was painted black, so now the surface rust and rot are visible.
Roughly 16-20 inches square.
I don't have the time or energy to replace the entire rear floorpan, and it doesn't...
Need the following:
- left/right rear floor sections under rear seat, hump and raised sections are fine.
- rear floor footwells.
- trunk floor or sections needed, in the depression or sunken middle area, bad pic but just the rear lower corners and the front right corner by the tire mount.
-...
Yes, a Cragar Sparkler.
I have 1, figured I'd look for another.
This is not a GT or a regular full chrome Cragar. I cleaned up a small area on mine to show the coloring better.
Mine is a dirty, slightly rusty, 14x6 BBP.
Idealy, another same size, in roughly the same condition.
Would consider...
I have a 64 wagon, looking for the plastic driver side armrest.
If it has a blue pad that's a bonus.
I've included a pic of both my driver side and passenger side.
I'm not even sure I need it, it looks like it was cut short for some reason, but it's worn along the leading edge and the door...