Search results for query: *

I am on the hunt for a trunk lip moulding for my 70 Satellite conv project. There are repos on the market for the same moulding on a GTX, but I don't know if they are the same profile or not. They are not listed as compatible....

Looking for a nice set of rear bumper brackets for my 1970 Satellite Conv project. Must be in pretty good shape. thanks

I will pay good money for these side moulding clips for my 1970 Satellite Conv. I need at least 8 of the blue plastic clips and 6 of the metal push-in clips. Can't seem to find any of these. The square blue ones are PN 6003016 and 40 are used per car. The metal ones are PN 6001660 and 6 are...

I need the kickdown linkage that goes from the swivel bracket at the rear of the intake to the carb. I think it's two parts. 1970 318-2bb, A904 trans.

Yes, I am looking for the elusive white vent window plugs. the 4 big ones and the 2 small ones. At this point I will take what I can get. I tried the repo small ones and the paint fell off when I tried to install them.

I need a set of hood mounted turn signals for my 70 FM3 Satellite Conv project. I need the wiring more than I need the actual lamp housing as I can splurge and buy NOS housings. The wires with the lamp sockets measure 52" long each. I think there might also be a short harness with a union on...

I am looking for the off-white/parchment B-pillar windlace pieces (both sides) for my 70 FM3 Satellite Conv project. They measure approx 23" long. I need them to be in very nice condition. They are out of stock at every repo place I could find. Plenty of white windlace out there, but it is...

I need the retainer for that keeps the remote mirror handle from rotating. The repo ones don't fit, and I don't want to risk damaging my new paint to hog out the holes. The silver one in the picture is of an original part. the yellow one is of the repo one that I couldn't get to fit.

I need a pair of these door glass stops. My car came without glass so I need one for each side.

I need a set of 2944327 14x6 steel wheels for my FM3 Satellite Conv project. I am not as picky about the date codes. just has to be the right ones. Willing to take partial sets.

I need a LH CONVERTIBLE windshield pillar trim piece for my 1970 Satellite convertible as pictured. any color, I will paint it to match the other one. thanks Chris

I need a good pair of original inner windshield trim clips. I had a bag of repos and broke every one of them trying to install them. the repos are just too fragile. They are for my 1970 FM3 Satellite convertible project. I will pay a good price if I can get them this week. thanks Chris

Well it appears that they don't make new driver's door glass for convertibles anymore, so I need a good "clear" driver's door glass that isn't scratched to heck.

I am getting ready to install my new quarter windows on my 1970 FM3 Satellite Conv project and discovered that I am missing the spring on one of the regulators and one of the plastic bushings. I could also use better clips to hold the rollers on. parts should be the same from at least 68- 70...

I need a good driveshaft for my 1970 FM3 Satellite Conv, 318, A904 automatic & lame 7-1/4" rear end .

I'm looking for a 1970 starter, part #2095150 & 2095219. preferably Jan-Apr 1970 or late 69 date code.

I need a pair for brackets that holds the convertible fluid lines to the sheet metal near the pump. 1970 Satellite Conv. probably the same for all years.

So it's engine rebuild time for my 1970 FM3 satellite conv. Turns out that I am missing the fan and crank pulleys. Getting a replacement crank balanced so I really need a crank pulley ASAP. The parts manual tells me the crank pulley is 2946789 and the fan pulley is 2951092. I suspect that...

When I got my 70 FM3 Satellite conv it was partially dismantled and I am learning about all of the pieces that are missing as I try to put it back together. Todays list of items are related to the quarter windows. I don't see any of these items being repo'd so I am hoping someone has some of...

I need a Miller C-4087 caliper piston puller to get my single piston Kelsey Hayes calipers apart. The pistons haven't been moved for 30+ years so air isn't working. I see a lot of these tools listed on ebay but they are selling only the outer piece. I need the whole setup in the picture.