Search results for query: *

I am in need of the turn signal/park lamp housing screws and clips that hold them to the front bumper. My one screw stripped out and the clip is ****. I only need one of each but a couple would be cool. I was having issues with the housing grounding to my bumper and that is how I found the clip...

I am looking for clean rear bumper bolts for my 68 Roadrunner resto. I have 4 bolts and 2 nuts but I need 4 more. Megaparts is out of stock and no one else seems to sell them. Anyone got some really nice clean rear bumper bolts?

Hey all, looking for a pair of retainer tabs for the lower corners that slide into the lower windshield trim for my 68 Roadrunner project. I can't for the life of me find a set for sale new, so hoping someone has some laying around I can grab. Thanks to @dadsbee for the photo from your thread...

I am looking for someone with the original pieces to a steering coupler. I lost the two "pucks" but have my spring and pin. Anyone has a couple of those that are in great shape I would like to snag them. I have heard all the repop steering parts kinda suck so originals are probably the way to go.

Looking for a front sway bar for a 68-69 B Body. I need the bar and the brackets to mount to the K frame. Let me know what you have. I want an original, not ADCO or Hotchkis stuff like that.

Anyone have a nice set of seatbelts for a 68 B body bucket seat car? I really need the two outside retractable belts and then the rear seatbelt set. Figured I'd ask here before buying some repop junk. Black in color would be the best as it has black interior. I guess if you had a complete set...

I an in need of a piece for my buddies 1970 column shift linkage on his 70 coronet. It is the small lever on the right that goes from the cross shaft to the shift lever on the trans. Let me know what you guys got. I would buy the whole linkage if its all I can find. Thanks in advance. Pic below...

Looking for a bellhousing for my 68 Charger. I have a small bearing retainer tranny with the 4.354" hole, so the bellhousing has to be the small hole and for a 10.5" clutch. Basically from a 66-68 car steel bellhousing. Lemme know what you got. Located in Buffalo NY.

Looking for a nice set of OE windshield moldings for my 68 Charger. Please let me know what you got.

Anyone have a 1" factory solid aluminum fan spacer? Looking for one if anyone has one laying around and the bolts too if available.

Looking for a clean original nice hood for my 68 Charger. Previous owner cut a hole in mine for a tunnel ram and am looking at stashing away a clean hood for the spring when I swap it back to original. Let me know what you have. I am in Buffalo, NY.

I am wanting to find and purchase a TM7 manifold for a 440 in very nice shape. Preferably unmodified and in nice shape for my 68 Charger. Let me know what you have.

Looking for dash trim for a 68 Satellite or a 68 coronet. I am going to paint it so no worries a bout which one it is or finish quality.....just as long as it isn't broke.

I am in need of a chrome gauge bezel and screws for my 68 Roadrunner. PG classic is the only one I see that makes a new one and I'd rather a nice original one instead. Let me know what you have. Thanks ahead of time!

Hello all looking for a 1968 383 or 440 solid charger preferably a 4 speed. I know it's a long shot but I figure maybe someone on here has a solid project that they have burnt out on or a driver car. I am not looking for a screaming deal or anything unrealistic but a solid car for a fair price...

Hello all. I just sold my duster I had been playing with over the past few years. I am looking for a 68 solid project car, but wouldn't turn down a 70 either. I guess a 69 that's clean would be ok, but I'm partial to the 68. Let me know what you got or know of. Time for another project and...

I am looking for a nice unported stock DP4B intake for my roadrunner. Let me know what you got!

I am in need of the driver side bottom window trim piece for a 68-70 b-body roadrunner. Mine was held in by a screw and I want to replace the one piece. Must be ding free but I can polish the stainless if necessary.

I am in need of a 2 7/8 in. rear end yoke for a 489 case with the 29 spline pinion. Let me know what you got.

I am in need of a 68 b-body 4 speed crossmember for a roadrunner. From 66 to 69, I guess that holes for the manual trans crossmember go right through the bottom in the middle vs. the auto one which has a bracket on the back where the trans pad mounting bolts go through. Any help would be...