• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Propwash

    Trunk weatherstrip install?

    Anyone have a quick pic or can explain how the trunk weatherstrip lays in on a '69 roadrunner? The questions I have are; does the weatherstip along the gutters ride flush with the edges of them or does it overlap one way or the other? The end seams...Is the start/stop of the seal in the...
  2. Propwash

    Any folks use the 2 part spray cans?

    Fellow automotive acrobat's................:icon_kidra: At the local paint store, I see you can buy paint to order in a can that has a slot on the bottom to pop in hardener....Thus a 2 part mix relating to something coming out of the gun. Guy at the store says you have about 24 hours to...
  3. Propwash

    68-70 B-Body rear window corners

    Hey fella's- Need some help again. On my 69' Roadrunner project I installed new quarters and rear window corner brackets, amongst other things. There pretty much wasn't much of anything left in that area back there. I'm pretty sure I got it seated back there the way Ma Mopar intended, but...
  4. Propwash

    Opinion's on Upper Radiator Core Support

    Hey Gent's... Looking for some outside opinions on the upper radiator core support on my 69' Roadrunner.. It's kind of hard to tell from the pic I took a while back, but it has 3 long bends/dents along with a several smaller ones. Some of the smaller blemishes I can get out via body...
  5. Propwash

    Shackle Mount Help Needed

    Hey Gent's, Got the new frame rails in my project and am moving on to the new shackle mounts from AMD. After roughly jigging up the new right side shackle mount to the frame rail with Vise Grips, I noticed that the housing for the shackle bolt/bushings sits 1/2" further back than the factory...
  6. Propwash

    Cleco's or sheetmetal screws

    Hey fella's, In the past i've been using 1/8"-3/16" cleco's for alignment and securing panels for weld up for a long time. I have heard of guys using sheet metal screws as well. Have any of you guys used the sheet metal screws instead? How did they work out for you? Any issues as far as...
Back
Top