Search results for query: *

Anyone on ebay have refurbished ones or any company that makes new ones? Its the rubber that bolts to the front left and right side of the 70/maybe daytona fenders. And if not, how important is it to have for the 70 Charger?

I know there’s three different parts that all go together to make the a pillar from the cowl and door hinge panel. I have the three parts saved on AMD website for each side. Just trying to figure out how they go together.

Just got an AMD floor pan and firewall order and it came with these 3 parts. Would like to know what exactly they go to!

According to my pics, does the floor lip go in between the inner rocker front lip with the firewall sandwiching from the top?

You can see the slight difference in 2 of the 4 floor supports, wondering which one goes in front and rear of the front floor pan from this picture:

What guage front floor pan is the OER, AMD, Sherman?

Can anyone tell me how wide across exactly the main floor pan in inches? Thank you!

Im building charger with AMD panels on a jig. Im trying to get the perfect distance between the rockers top lip. One measurement across from the front of the rocker and one in the back near the rear wheels. My actual charger says 62 1/2” and when I measure that to my jig project my AMD torsion...

So we have the outer A pillar post and the inner one and then this one which I can’t seem to figure out: Let me know!

Anyone with a 68 to 70 charger could open both doors and measure from the top pinchweld of the rocker panel to the other side top pinch weld and let me know? I got 62 1/2”

Where can i get this part for my new rocker panels. Cant seem to find the name.

From youtube.

This is the outer and inner right/passenger rocker for 68-70 charger from AMD. I also have the other side and both cowl side panel support where the door mounts. Which also fit’s iffy. Anyways are these lining up right or is there some work to be done? Ps. anyone know the name of the two...

Forgot where this one went even tho i planned everything out

Hey guys! I got my first order of outer rockers and rockers side, Cowell support panel and the lower cow to start. I finished my body jig last week and painted it and I was wondering if I could just weld the inner and outer support rockers together and make it one big piece, I don’t see a reason...

On the rocker panels. Where?

Does anyone have any pictures or blueprints of how the outer and inner rockers fit together on a 68-70 charger? And right under the door, is there a sheet metal skin you put over the outer rocker to make it match up with the quarters & doors?

Im building 70 charger with AMD panels, judge me if you want. But i just got a jig welded up and im going to attempt it. I have the whole front end body panels & all specific ‘70 parts that arent remade. Great shape too. Took alot of time to aquire them. I was wondering whats the best approach...

What is this part called? And do they remake them? Its on the tip of a 1970 Charger Fender

Anyone know the difference? Lol