Search results for query: *

Hello Boys... I bought a set of MOSER Green bearings.... for my newest "Toy " a 73 Chally... can someone tell me, how to remove the thrust block inside the diff ?( OPEN DIFF ! ) With a Sure Grip Diff . the Story is quite easy....the small thrust pins will come out easy with a magnet...

.. Hello guys.. I ve bought a TQ Carb for my 66 Coronet.... the car looks good, but I can´t Identify the carb... there is a Metall Tag mounted on the rear right corner...that says C 6046 on the base there is a number STAMPED 9097 9 and below that number there is a 82 6 On the top...

Hello guys... today I wanted to change my Cam /lifters... so I removed all the parts. But I think there will be a problem with the pushrods... the lenght is @ 9.31 inch ( that should be OEM .... as fas as I know ) but the Ground Circle of the old and the new cam is Different.. "OLD CAM...

Hello folks... today I made a long journey with my Coronet... everything went fine 1... everything ? No . When I am driving at @ 50-60 mph ( 2300-2500 rpm ) my engine makes a ticking sound ..coming from the drivers side of the engine.. If I decellerate..sound is gone steady cruise sound...

Hello folks... due to my Carb issues, I decided to buy a Quickfuel Carb ! Said... and done. But the I found out, that the OEM Intake doesn´t combine with the HolleyStyle Carbs, so I had to buy a Edelbrock Performer 440 Intake too.. (Part No. 2191 ) When I opened the Box...I saw two little...

Bought a new 1806 Ede for my 1966 Coronet... The 1806 is a 650 cfm Carb... and my car has a 440 cui R/B engine out of a 1969 car.... So far so good.. I also installed a Innovate LC 1 to check the AFR while driving . and the AFR ´s shows like that : Idle 12.5 Cruise 14,4 Part Time ...