Search results for query: *

PK3410668L 3023 6939 local guy has this 727 for sale, would like to know what the code brake down is. Thanks in advance

After two seasons of dealing with this leak, I finally fixed it. This leak was bad and we figured it was the Knurl on the Eagle 4.15 crank it is so aggressive as you can see in the pictures. The rope seal that was installed in the motor was frayed. I was going through a 6 pack of Valvoline VR-1...

My buddy john had his big inch high compression Hemi on the dyno at Jack Merckel race engines long island n.y. and on the 12th pull on the 7th day approaching the 800 hp mark the intake valve seat came loose hung the intake valve open, the exhaust valve hit the intake valve, the piston hit the...

Found this on ebay, looks cool . Was wondering if anyone is running this setup.[ATTACH=CONFIG]299486[/ATTACHhttp://www.piercemanifolds.com/default.asp https://youtu.be/VQnWddrterc

hi guys ready to start my new 493, in the mayham of removing and the install i miss placed the clips (gremlins or small trolls took them )that attach the rods to the bell cranks and are made of spring steel. anybody have them or know where to get them ,thanks agin

Hay just got my 493 pump gas ( 440 block ) motor on the dyno today, Eagle Crank, Rods, Icon 9.7-1 pistons, out of the box Eddy RPM Heads, mild Crane Hydalic Roller cam HR -230 -352-25-12 , Crane roller Rockers, performer RPM Intake, 850 Holley, Milodon oiling system, ARP everything.This motors...

Mopar guru's, please explain what the rest of the letters & numbers represent on my 742 case " curious " Thanks. :moparts ghost::sSig_thankyou:

Anyone using a pre lube system on there rides?

I know header are the way to go but was wondering if anybody out there in mopar land has run or is running manifolds on there a big inch 440 im building a (496) pump gas, eddy head, roller cam,motor for my 67 gtx .(street/strip). Thought it would be cool to do the sleeper thing,manifolds to...

ANY MOPAR BROTHERS OUT THERE HAVE OR KNOW WHERE TO GET A REAL GOOD CORRECT FITTING ENGINE DOLLY FOR A 440? GETTING READY TO PICKUP MY 496. THANKS GUYS , HAPPY HOLIDAYS.:merrychristmas:

440 hp exhaust manifold removal :icon_rolleyes:MY EXHAUST MANIFOLD DRIVERSIDE HAS A LEAK BY THE REAR PORT, NOT TO BAD BUT I HATE THAT SOUND FIGURE I GOTTA PULL IT SOONER OR LATER . I FOR SEE BLEEDING KNUCKS AND SNAPPED BOLTS ANYBODY HAVE A PROCEDURE ON REMOVING/ PREPPING THEM BEFORE PULLING ...

Question ? , what is the maximum safe valve lift on a 67/ 440 -915 head in its stock form.thinking of possible cam change and didnt want to pull heads.and i dont want coil bind.nothing wild something a step or to up thanks mopar gods

Hi Mopar people's, can anybody out there in Mopar land tell me the cam specs for a 1964 426 street wedge from the factory ?. thanks.