Search results for query: *

In the processing of upgrading to aluminum heads, I have to 440 out of my car and have removed the 906 heads and camshaft to ID the cam for proper springs on the new heads. I sent the cam to a local recommended builder who was able to spin it and produce the following information, as no part...

I found a completely rebuilt ( 5+ years ago) never ran 440 local this weekend that I am interested in buying. Just curious what some more seasoned engine experts think of the motor based on specs provided below. 69 440 block Hot tank and magged Align hone mains Bore, hone with torque plates...

My 68’ RR came with a 7(?) quart Milodon oil pan when I bought it. The torsion springs on the car were jacked way up in front to accommodate the depth of the pan for clearance on the street, which caused some alignment issues. I didn’t like that look and lowered the bars a good 2” and had the...

Helping a friend clean out her husbands storage units ( he passed away two years ago and was a Mopar guy ) and came across this cam, some small block heads and other various parts. Here are the specs on the cam I found. Eng Cam kit # Lift...

Finally getting ready to start working on with my son on my first car that I have had since high school. Car is factory equipped with an 8-1/4" rear diff and 2.71 gears, non-posi I would like to swap gears to at least a set of 3.23 or possibly 3.55 gears with posi. How difficult is it to...