Search results for query: *

Selling my '63 Fury .. a guy asked " Does it have the original 8-3/4 rear end with the >splined axle and nut on the outside ? <. What am I looking for to id. this. I know its an 8 3/4 but don't know what he is referring to by splined axle nut and how to tell ..they were used prior to '65 and I...

Just bought a 383 edelbrock carb 66 Satellite 727.. there is no kick down the car only shifts manually ..does anyone have a number for the Lokar cable ...Summit shows 7 different ones .. also can I drive to trans shop shifting manually or will this burn up the trans ..blew my shoulder out or I'd...

have a sloppy 4 speed shifter in my 68.. guess it needs bushings replaced ..how do I tell if its inland or hurst

thinking of buying a dart with a 493 ..440 block stroked mopar stage 6 alum head m1 intake 564 lift hyd cam adj > > rockers a holley worked over for to match motor!! Tranny all your klevar > > bands an clutches 5.0 lever deep pan 3800 coan conveter!! 391 posi!! street use or track car...

here is my situation .. got a car I'm thinking of buying the car has a built 440 maybe 4000 miles on it ..oil pressure has been fine around 70/80 lbs while driving 65 at idle.. the guy who owns it called me as we are negotiating the price to tell me the car is acting up ..it is at 60lbs at idle...

what should I expect to pay for a A833.. a guy has one new syncros and bearings $350.. 1969 b body date coded 23 spline

my engine is new ..440...set timing at 10* total 35*...new plugs/wires /coil/cap (checked double checked all) ....checked firing order 10 times .....adjusted Holley with vacuum gauge 15hg vacuum ..set idle & mixture .. 7/8 lbs fuel pressure..floats adjusted properly.. power valve fine ..car will...

got the 440 in my 63 ...need some help from the wise men.. is this what I'll need for the trans/carb hookup ..thanks .....http://www.amazon.com/gp/product/B00...=ATVPDKIKX0DER http://www.amazon.com/gp/product/B00...=ATVPDKIKX0DER http://www.amazon.com/gp/product/B00...=ATVPDKIKX0DER

just got my 440 rebuilt / installed .. it has a backfire through the exhaust ..removed carb and.rebuilt it and still backfires..no vacuum leak.. ran it at night no sparks jumping . I'm looking at pictures of 440's and the advance on the distributor is pointed towards the front of the car more or...

looking for member in Buffalo NY area to assemble 440 with or without my help ..probably cost more with my help ..anyone interested .. thanks

looking at ...440 engine 509 cam 12 to 1 compression ..street engine 93 octane or not:edgy: if race gas / octane boost I'll pass on it

got a line on a maybe affordable 426 wedge engine... I read somewhere ( don't recall where ) there are good and not so good 426's .. something about B / RB / and an S engine ..what and where am I looking for ...any comments appreciated