Search results for query: *

Hello All. I recently acquired a 1967 Coronet with a 440 and 727. It has the stock throttle cable and kick down bell crank mess. I have tried adjusting the rods and bending new geometry, but still not satisfied with the shifting. I've used the Bouchillon solution on my other car (road runner)...

Hello: I am going from the 1 terminal Neutral Safety Switch to the 3 terminal version. Anyone know of a source for the 3 terminal pigtail? I can make the remaining harness work. appreciate the help. Have a nice day!

Hello: My valve spring compressor tool was loaned out years ago and never came back. I borrowed this from a friend, but he forgot how it works. Anyone know how to use this? Thanks and Happy New Year.

Hello: I work with three mechanical engineers that are all car guys. They like their Chevy 350s and MOPAR is foreign to them, but they never give me a hard time about it. We bench race and share wrenching stories all the time (BTW I am a Electrical Engineer). So I told them I am tackling my oil...

Hello: Going to change the valve cover gaskets on my 383 next weekend. Looking at the passenger side it looks tight with the MSD8545 distributor. So, do I need to pull the distributor to get the valve cover off? Any tips appreciated. Thanks.

Hello: Going to swap the oil pan gasket on my road runner this weekend. I've pulled the idler off the k member. Can't find the correct socket for the pittman arm nut. My 1950s craftsman dial caliper shows precisely 1.3651. I've read 1 5/16 is correct, but believe it, or not, local auto stores...

I've seen a lot of questions about kick down adjustments, and I went to look at how my Road Runner is adjusted for kick down as I do not think it is shifting properly. I'm a bit confused, and here are my pictures. Below is a picture from the 68 Plymouth Factory Service manual. Note that the...

My 68 383 has Mopar Performance valve covers. I've read the various threads on FBBO on valve cover gaskets (Moroso and FelPro fiber), but I get the assumption these are for stock valve covers. I also see a 50-50 opinion on RTV vs dry. Personally I have not had much luck with RTV, but let me...