• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Demonic

    Pinion bearing preload, 742 carrier.

    I'm putting together a new set of 3.55's, Yukon R & P, New Timken bearings, new Auburn sure grip. I'm having trouble with the pinion bearing preload. It's either 55 in. lbs or about zero. The preload shims in the kit go in .005" steps. At .045" it has no preload, spins easy. At .050" it...
  3. Demonic

    Pinion marking help

    What the heck do these two this say? I figured it would be +1, +2, or -1, etc. Yukon 3.55 set going in a 742 carrier. factory one below in second picture. Thanks in advance.
  4. Demonic

    Replacing a pinion seal on a 489 carrier?

    So, I have a leak at the pinion seal. The FSM has a procedure - check the rotating torque in in.lbs without the wheels/drums, r & R the real, retorque to X not to exceed the initial reading, etc. Has anyone ever done this successfully?
  5. Demonic

    Input shaft bushing tool SP-3630

    I'm looking for a Miller SP-3630 input shaft bushing remover tool. I'm in the middle of a 727 rebuild and there's a bit of play there. Or, anyone have one that they can measure for me? The bushing end looks like a tap - threads into the bushing and it then pulls out. Thanks in advance.
Back
Top