Search results for query: *

Stock 1970-318 This is my old one. All I can find says ball tip. Do they not make the originals anymore. I called Summit and Mancini Racing says their is Mopar Authentic restoration and theirs have the ball tip. Mine are 7.5 long. Could someone help me out on this please.

stock 318 on a budget . Crank and rod bearings,Your thoughts? thanks Dave

First small block and its for the 70 charger. Original engine just want a cruiser. Looking for suggestions on a cam. Engine is 30 over going with duel exhaust and 4 barrel. Would like low and mid response. thanks for any help.

1970-318 want to order but not sure which ones. Standard bearings and just a cruiser. Looking on RockAuto More Information for MAHLE / CLEVITE CB481P8 and More Information for MAHLE / CLEVITE MS540P would these be the right bearings? Thanks

1964-71 383-440 valve cover reference guide with pictures Untitled Document

So I bought the 70 charger last year and it has a 318. Was told engine was rebuilt. Took off valve covers and intake and it seems to be true from what I can see. I asked the owner if it was broke in and he said he did not know. He said he drove the car 20 miles and that was it. Car sat since...

1970 charger ,installed a wix tran filter and its leaking on the whole driver side of the pan. The wix filter had a rubber gasket for pan. I installed dry. 12 FP torque on bolts and checked them again. Many people said install dry. Should I use a sealer or double up on the pan gasket or get a...

ATF but can I use ford mercon or dextron.

sb 318,when I bought the car was told engine was rebuilt. Owner had No info so my question is will an rebuilt engine idle if it was never broke in?

1970 charger 318, My question is there are 16 bolts for the intake. Are they all the same length I ask because 11 are 1 1/2 and 1 is 1 inch. I would think the front 2 and back 2 would be 1 inch. Thanks Dave

So if I have a bad battery meaning it dies after the third cylinder test will that not give me an accurate reading? Does the test require a strong battery? I turn it over around 3 to 4 revolutions. No plugs in the engine. Was thinking of putting jumper cables on the car. Thanks Dave

70-440 I have a mechanical gauge that I installed that says 75psi running and 30 at idle and my gauge on the dash would stay pegged,been this way since I bought the car. so I bought a new oil sending unit and now it says 35psi driving and 15 at idle. I think the new one is bad. What do you...

why do they say 30fp on an aluminum intake? I never knew the reason so thats why Im asking. Is it because its soft material?

1969-440 what are the signs of decking? I bought the Bee around 3 years ago. So the last owner-10 years-was clueless of what was done on the car. Been asking about valley pan problems and not able to get a different intake to bolt up. I decided to sand the pad and I can barely see any numbers on...

Can someone tell me the size and length of the 4 bolts for the cross member please. thanks Dave

I have a 70 Bee with aftermarket cross member. I believe 833 is 1967,no serial number or pad on it. Brewers says to use 68/69 cross member for that 4 spd. Sound right and why? After market one on the car you can not get to the mount bolts,I think someone made it.

cant seem to find anything online. bought from Hurstshifters-Scotty- hurst comp plus and cant figure out how the reverse rod gos.thanks for any help.

were on the passenger side will I find the 3 inch pad with numbers? I think it is a 71 do to the side cover. thanks Dave I only have 1 mounting pad for shifter.

so I have a 70 Bee 4spd pistol grip-1970 is the slip in handle. So I want to change to 68/69 hurst shifter because mine needs rebuilding and I dont want a slip in,I perfer the 2 bolts. I emailed these guys hurstshiftersonline.com and asked them about it. ScoTTy told me all 68-70 were slip in...

So I have 4-10 now but want to put the 3-23 back in. the 4-10 are nice but rpms are up there. Do I need to replace the axle bearings? Is anyone using 3-23 in there 4 spd? Is it a dog of the line? burnouts? Both pumpkins are sure grips and I have a 440 in the Bee. Mainly street driving but...