• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. C

    Adjusting shift stop bolts on a Hurst shifter

    When you adjust the shifter stop bolts on a comp plus shifter,is it done in the 1-2 gate or the 3-4 gate.
  3. C

    What oil in a fresh rebuild on an 833?

    Just got done rebuilding a 70 833.What type oil should I use,Synthetic or mineral.Oem style syncro rings. Thanks,John..
  4. C

    452 cylinder heads on a 70 440 block

    I'm putting a motor together for a friend of mine.It's a 70 440 short block with later 452 heads.The heads that he has have drilled steam holes between the lower row of head bolts and the block does not.Will this combination work or is there a chance of this running hot because of a coolant flow...
  5. C

    Connecting Rod Bearings

    I'm starting to assemble my 440 short block.Crank is in and rods and pistons are next.My question is,can you use a standard size insert on 1 half of the rod and a .001 under on the other side to adjust clearance.If so,where would you put the larger shell.I'm not saying I have to,just want to...
  6. C

    70 440 Main Bearing Question

    I'm rebuilding the 440 in my 70 Charger.What should I use for main bearings,1/2 groove or full groove?I have both available to me,I know these were originally built with 1/2 groove bearings but that was 50 years ago and things change.All opinions welcome.Thanks,John.
Back
Top