Search results for query: *

Hi i have a 1964 plymouth fury. Original 318 motor, the cam has a regrind on it from PO, it has dual exhaust and a factory 4 barrel. It always has idled pretty rough. Even to the point of dying occasionally after one missed beat. I've turned up the Idle speed and that helped but it will still...

My idle drops ATLEAST 200 rpms or so when I shift the car from PARK or N, into DRIVE. And starts to become a very sluggish uneven idle. Starts to run crappy basically and often stalls. It will go from 800 rpm in N, to 500 rpm in Drive If I adjust idle down it wont stay running and will always...

I have a 64 Plymouth fury with a 727 torqueflite. TF-2 shift kit installed and was rebuilt a few months ago. This is the pushbutton early style trans and requires full throttle for kickdown. I was curious... if I'm going roughly 40 mph going on freeway and I floor it it will launch forward...

I have a 64 fury wagon transmission has been rebuilt this year. Engine runs strong and passes all the general tests. Creates good vacuum. Timing is set at 15/TDP. Idle is set to 530 rpm using timing light. Did best to tune the CARTER AFB using the method where you turn mix screws in until it...

I just removed and painted my intake and valve covers because they looked terrible and were leaking. I have some questions for some seasoned mechanics on what the best methods, or any tips and tricks that can be used, to install it again. My main concern is the intake. I've never installed a...

What do you guys do ? I have a dirty old intake with layers of old paint falling off and it's leaking oil. It's an original cast iron poly 318 4 barrel intake. Want to remove it and paint it and then install so it won't leak oil anymore I was gonna pull it off, apply a heavy duty paint...

I think I need a rebuild done on my 1964 pushbutton 727 trans. my questions are: Can anyone tell me more about there experience with trans-go reprograming kits, specifically the TR-1 and the TR-2. why would you pick one over the other I'm used to a manual trans and have rarely ever drove an...

When going up hill my 64 Fury is making a loud clunk or bang which sort of shakes and shudders the whole car as it happens. This happens when I accelerate up the semi steep hill that is my street. And it only happens for a moment and then goes away. When car is revved up in neutral or park it...

1964 plymouth fury wagon. Original Poly 318/727 combo. What is this part? It looks like it has a cable connecting into it that is attached to the 'park' slide lever/hammer. It is at the back end of the transmission. Why would it be leaking and could it be spraying out ATF (pressurized leak)...