Search results for query: *

I'm installing a 340 auto trans. Checking the degree angle down front to rear, what is the norm and what are the limits up and down with side toe side at 0*? Thanks ron

How do you identify the different backing plates and the size brake lining and drum size they need?

What problems would I encounter by swapping a newer 5 speed (2000 and newer) out of a V8 truck onto a 1968 318? Will everything bolt up and mate? Putting this setup into a 1953 Studebaker, hoping to use the peddles and Hydraulic clutch. Thank ron

Is there a difference in Hydraulic lifters between Big blocks and Small Blocks? I ask because Napa calls for the same lifter for 440 and 318's and a different number for a 383. Please explain Ron

Does anyone have pic's of a 383-4bbl with a/c of the engine compartment that has not been altered and is original?

My son just purchased a 70 Bee. Everything is there but the 383. He found a 70 383, is there a matching vin on the 70's, 383's and where?

Can anyone tell me what the compression was for a 1976 400 out of a charger? And what low cost bolt-on or cam what help in raising the performance?l

What roller cam and lifter Pkg is everyone using in their Street Big Blocks?

Looking to install a remote oil breather system on my big block. Not sure of what to use. Can I see some pic of some options?

Trying to get all the angles right. Starting with Engine,Trans down angle if car is level. What is the range from good to bad and ideal?

I have a sure grip with the # 2070684 stamped on the ring gear' it has 2.76 stamped also. That's all I have! Can anyone tell me if this is a 7 1/4,8 3/4 , 9 1/4 or 9 3/4 sure grip? Or what do I need to look for to identify it?

Can someone inform me of the two different sure grips by Chrysler? What year they changed from one to the other? And which is most desirable to used?

With number on the case 207074. There is no 1 or 2 following the 74. Can anyone give me any info on this rear. It has a 3:91 sure grip

I see that some 8 3/4 rears are painted a Gray. I don't remember this back in the 60's & 70's. Am I just old and can't remember?

Is a sure grip the same for 741, 742 and 489?

Just got these rockers for my 540 cu. in .557 lift cam. I got the adj pushrods and soft valve springs from comp. Just spent all day trying to get the correct pushrod length with no luck. Can someone help with a sure fire way of doing this task? I look on you tube for help and all you see is...

Seems like my Indy rockers are no longer available! My one exhaust pushrod broke apart at the cup and messed up the rocker. So it looks like I need a whole new set of rocker arms. What are some good choices for the money? I know of some of the high dollar rockers, but are there other choices...

Thinking of swapping out my P4120661 cam for a Comp CL21-228-4 Hyd. It's on my 540 stroker with 440-EZ-1 heads and 4500 intake. Has a ATI Treemaster 729800 and 4:30 rear gears. Looking for input and opinions!

What is everyone using in their 4 speed trans?

What is the best product to use on cast iron exhaust manifolds that keep the look of cast blast?