Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am in the process of switching from a single Holley to a original intake and dual carters. When I removed the single intake I was happy to see a heat shield was attached because I needed one. Also, there was another surprise. I noticed the intake gaskets nicely stuck to the intake but there...
Hi all I am planning a 1350 u joint switch since I have to cut down my driveshaft and rebalance. I found a correct diameter weld on yoke but before I cut my driveshaft I need to know the wall thickness of the standard Roadrunner shaft. I do not want to ruin the old shaft only to find out I...
I purchased a Dana the other day for my 70 Roadrunner. My Roadrunner has a 426 Hemi auto right now with a 8 3/4. My plan was to install the rear with all new seals and shorten the drive shaft as required. The issue I encountered was the yoke on the Dana appears to be a 1310 yoke with U bolts...
I am thinking of replacing my 8 3/4 rear with a Dana S60. The Dana will have a 1350 yoke. This is on a 1970 Road runner. Can my original driveshaft be converted to a 1350 at a driveshaft shop or do I need a new one. I am not familiar with the interchangeability and lengths. I understand...