Search results for query: *

We only had a couple weeks to get this thing out, rebuilt, back in, and broken in before hitting the dragstrip in Silkeston MO for the No Name Nationals...There's a few great tech tips along the way!! Enjoy!

TREMEC TKX 5 speed in a MOPAR B Body? Do you need to cut the floor?

I couldn't pass up the opportunity to compare these side by side... The all new Tremec TKX 5 speed next to the famous Mopar A-833 4 speed....

Hey guys! Not sure if you saw our last video where we installed a Yukon 3:73 sure grip center section and green bearings into the Super Bee. Shameless plug here... We then took the car out for a cruize and after all the drama we noticed a little vibration. I put the car back on the...

Watch and see what we found out about U-joints!!! If you do this job, make sure you have the right U-joint straps! Broken parts!! Super Bee fixed and back to burnouts!! - YouTube

A little visual on the install... Episode 25!! We finally get back to the Mopars!!! The Super Bee gets a new Yukon center section for the 8.75 axle. It has a 30 spline sure-grip with 3:73 gears. While it was apart, we installed the green bearing kit on the axles and sent the driveshaft out for...

I did a search, nothing came up on the topic so here goes.... 1970 Super Bee 383 4 speed (All original components except clutch of course) Every time you push on the pedal there is a loud audible squeak. It seems to be out in the engine bay. I have lubed all the pivot points from pedal to...

So a little back ground first: My dad had this engine rebuilt in 2000. The engine builder has built many big and small block chevy's for my dad over the years but I think this is the only Mopar. It is a stock 1970 383 4 speed, .010 overbore, stock crank, rods, stock CR pistons, restoration cam...