Search results for query: *

Hello. Iam restoring my 71 satellite and recently got a new transmission, it s 1967 a727. The issue i now have is that the reverse lights are always on even when in drive because i figured i could try keeping the old neutral safety switch with the 3 prongs. My question is which neutral safety...

Hello everyone I ve been trying to find the proper part number either moog or spicer or some other reliable brand for that type of U joint so i can find it either on amazon or rockauto Thanks for your assistance once again !

I wanted people's opinion on their preferred cruising rpm. I will soon get a new 408ci engine, I have a tf727 my gear ratio is 3.73 and my tires are 28 inch so at 60 mph I should be going at something like 3 to 3.2k rpm. Is it considered too high for some long distance trip.

Hello yesterday i took my satellite for a drive, when i was pressing on the accelerator the RPM would go up but the car wouldnt really speed up, it was only when i would release the accelerator that it would shift and get some traction back. It feels like when i step on the gas the...

Being from Europe i wanted to have some inputs what is the situation when it comes to getting parts to build an engine is there a drought on parts since the kungflu hit the world? i ve placed an order for a crate engine and months later they are still missing some key part am i getting put on...

I m yet again asking for some information Are the differential compatible between the 3 different casing for an 8.3/4 third member ? i have a 489 with a regular open differential with the 4 gears, i have the possibility to get a cheap 742 third member with a suregrip in it. would it be possible...

I have another question I will be swapping my third member in the near futur (rear end is a 8 3/4 and both third member are 489 casing), the yoke on the new one is bigger than the one currently on my car. i already ordered the proper U joint to match the new thirdmember to the drive shaft but i...

Does anyone know how much fluid goes in a regular tf727 without an oversized tank ? I just want to be sure order the proper quantity after i drain mine and replace the gasket since it s been leaking for quite some time Thanks for your inputs

Hi, sorry for stupid question but Iym lacking the vocabulary, being french doesn't help with technical vocabulary. What is the name of the x shaped connector that connects the drive shaft to the third member? I have an 8 3/4 rear end mounted on my 71satellite and the previous owner had another...

Hi I would like your help identifying this transmission mount. I have on my 71 satellite a tf727(supposedly) the oil pan is the proper one and the length seems to be the right one but the trans mount seems to be for a 904. Can you help me

Hello, I m currently thinking of removing my old tired 360 on my satellite for a new small block, either a 360 or a 408 but being from Europe it s quite expensive due to customs and oversea freight, so if i m going to invest that much money into it i might as well also get a new TF727 to handle...