Search results for query: *

I have my 727 transmission out of my 69 roadrunner and figured I probably should replace the mount, does anyone make a good quality one? Engine has one Moroso solid on drivers side and rubber on passenger side. Was looking at the one pictured anybody run this one or know the height of it?

Does anyone know what converter this is?

The seal on my 69 727 speedometer housing is leaking a few drops, if I pull it out is a lot of fluid going to come out or should I drain trans first?

I bought the blue Moroso trans pan gasket and just seen where it says to not use with stamped pan. I have a 69 727 with a old direct connection deep chrome stamped pan metal is pretty thick should I get a different gasket or use this one?

New 440, penn 30wt break-in oil sft cam. Did cam break-in, rechecked valve lash. Changed oil filter added another quart. How long should I run this before switching to non break-in oil?

.030 over 440 so 4.350 bore, tf 240 heads. What bore size head gasket should I order 4.410?

So I get my 440 short block build back from machine shop, and find this was wanting.010-.015 below deck looks like crank was ground different on #5 and 7, which I have a positive deck height. Should I be worried about this?

If you install bigger valves in a 906 head how does it effect the cc of the chamber?

Has anybody here cut a 2 groove factory crank pulley down to a single groove? Yes it would be ran in a lathe bolted to a fixture. Thanks for any info

Can anyone give me some info on this cam?