Search results for query: *

Hi all, Firstly, yes I have searched on here and I've seen there is already quite a bit of preload info, but I couldn't see any that relates specifically to the cam and lifters we have. Koffel built us a 440 stroker a few years ago and the build sheet says it's a P5007698 cam. Googling only...

Hi all, looking for a bit of help to understand what stall speed we need for our application. I've read thru many threads on here which have given conflicting info, so still none the wiser to be honest! It's a 69 Sport Satellite that we recently fitted a 493 stroker from a well known and...

Hi all, We've just got our 69 Sport Satellite back on the road after 4 years. Now got a Koffel 493 in there, fairly mild, but still made 605 hp and 687 lbft on their dyno! All along we asked that it be easily streetable and stock-looking. So far it feels very useable in traffic and at highway...

Hi all We're looking at getting some replacement valve covers as the pair we have dont have any baffles in. As an alternative to adding baffles to the pair we have, i was thinking these might be a better option...

Hi all, Many moons ago we changed the original 318 in our 69 Sport Satellite for a warmed-over 440. The guy that built the engine and did the swap was more familiar with Fords & Chevys race engines and wasn't aware of how important it is to have a fully-functioning kickdown linkage on a 727, so...

Hi all Just wondering if anyone has any kind of exploded view (like you get in the manuals) of the park mechanism on a 63-ish push-button 727? We've just had our driveline vibration fixed :hello2: but while the car was in the 'shop they also (tried to) fix a leaking park mechanism gasket...

Hi guys What would you recommend to use for a leak-free seal on those pesky manifold studs? Does the sealant need to be high-temp? I presume it does but there are good sealants like loctite that would be easy for me to get hold of, but might not withstand the temperature? ARP Sealant...

Hi all Has anyone had any success in finding a good source of aftermarket fuel pump pushrods? Our 440's is showing signs of wear (about 2.4mm / 0.095" down on the original length) so we thought we could do with replacing it while the fuel pump is off. Hughes do a hardened version but...

Hi all Just looking for a second opinion if I could trouble you... We recently bought an AC Delco fuel pump for both our 63 Polara (426MW) & 69 Sport Satellite (440) - initially to help the Polara's starting 'issues' (it always starts, eventually, but takes a lot of cranking) but thought...

Hi guys We're looking into fitting a new trans cooler to our 69 Sport Satellite w/440&727, and could do with some ideas of what looks & works best regarding placement of the cooler and how to route the trans lines to the cooler. Also deciding whether to use hard lines, braided or rubber...

Hi all Could some kind soul point me in the direction of somewhere i could check casting numbers on HP manifolds? I have a pair and would like to check what date/year they are from. Thanks in anticipation! :) Rob

Hi all Just wondering if anyone's seen or used this gizmo for converting a stock-type shifter action to that of a Slap-Stick? http://www.duncan-motor-sports.com/2.html We're fitting a console & stock shifter to our 69 Sport Satellite but are a bit concerned that, with this standard...