Search results for query: *

What is my driveline worth? Performance McCandless blueprinted 440 (+0.030 over) with ported and polished heads and 509 cam, comes with intake, Holley carb and distributor. 727 transmission with manual valve body and 3500 convertor, comes with oil tube and indicator, trans bracket, flex plate...

I want to replace my axles of the 8 3/4 and i'm doubting between Moser, Dr.Diff or Yukon (USA Gear Standard). The Moser and Dr.Diff are stock lenght. The Yukon (available through Rockauto) are cut to length?? Does anybody have experience with one of them?

I've got the diff out because of a gear ratio swap and want to refill it. Which carrier do I have and which fluid do I need?

Has anybody done a NAG1 rebuild? I would like to know the difference between the Mercedes 722.6 and the Chrysler 722.6. On the outside they are the same (besides bellhousing) but i've red that some internals are different.

I recently almost finished my project doing a 2014 Hemi engine with a518/46RH in my 70’s Satellite but the transmission isn’t working properly. The only thing I didn’t check or rebuild was the trans because before I bought it it was rebuild. When going to a full stop the engine wants to stall...

Anybody swapped a nag1 into their 68-70’s b-body recently? I’m looking for idea’s.

I have a 46RH (from 1992) behind my 6.4 Hemi engine (from 2014). The transmission doesn't seem to shift right. The fluid level is ok. Rear end has 3.91 ratio and the convertor is stock from a b250. The engine is also stock. When I start driving it shifts fast to second gear. To fast if you ask...

Is the bolt pattern of a 8 3/4 the same as the bolt pattern of a 8 1/4? Can the drum brakes of a 8 3/8 be mounted on a 8 1/4 rear end without any husstle?

My rear end has a 3.91 in and it is making noise when letting go the gas pedal. As a will be using the car as a cruising in stead of racing it I’m going to change the gear and pinion to 3.23. I haven’t done this before and want to know which parts I need. I have replaced the axle shaft bearings...

For my 70's Satellite I'm looking for a Ford 9"rear end. Which rear end is plug and play? Which has the right length?

I have 2 transmissions. One is a 727 bigblock and the other is a A518 46RH with OD. The convertor that came with it has Lock-up. I’ve dissembled my Plymouth years ago and I’m going to replace the 440 for a 2014 Hemi SRT8. I cannot figure it out which convertor belongs to which transmission. I...

Besides Ebay and Craigslist, where can I buy a cheap 6.1 or 6.4 hemi engine for a swap?