Search results for query: *

I have been having problems starting my car, Its a 440 automatic tranny with a mini starter, Thought the starter was sticking , so i just turned motor over a little to disengage starter gear. I have been doing this every once in a while last summer. Thought I would go ahead and fix it. Well its...

I am trying to put a driveshaft loop on my car, the bolts they sent with it has large washers with it, do you just bolt it thru floorboard ? There is no frame or something sudstantual around this area within 6'' of u-joint ?

Bought Mopar Performance valve covers and installed a breather cap on one cover vented to atmosphere. Do I still need to install a pcv valve on cover and run to carb ? I have duel carbs do I tee them together or plug vac ports on one carb ?

When I started installing the valley pan noticed center port is not cut out on heads, there is a port on heads and on intake. Whats this for? Do I need to cut this out ?

Forgot to fill torque converter with fluid. Will it fill itself or do I have to pull tranny. Its a Hughes 2500 without a plug.

I would like to remove the studs in the heads for the exhaust and install bolts to install headers. They seem to be hard to remove easily any suggestions would be helpful before I screw up the threads trying.

Getting ready to install a 440 in a 69 satallite, I understand it is difficult to install headers when in car, Could I bolt headers on before installing or is that going to make it more difficult ? Have not bought them yet. What brand fits the best without a lot of clearance issues?

Putting together a 440 motor 10.7:1 pistons, I noticed I bought Fel Pro 1009 gaskets with a bore of 4.410. The engine is bored .30 over ( 4.350 ) Already opened package and throwed away. Can I use the gaskets or do I need to buy new ones ?

Changing motors from a 318 to 440 in a 69 satellite, Would like to install a deep sump pan. Will it fit or what kind of problems should I expect before I buy one.

Can anyone tell me which way the rear main seal goes in. I am rebuilding a 1975 440 and didnt pay attention when i removed it. Don't want to install backwards. I looked online but are still confused. The last thing i want to do is replace it laying under the car ?