Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've had a rattle knocking sound comming from the left front for awhile now. It just started to tranmit a vibration through the steering wheel the past couple of times I've had it out. I jacked it up and founda tiny bit of play in the upper balljoint. In the pictures it looks like it has...
Well finally got the car off jackstands. Test drove it and the steering wheel was not turning the way it should. So I pulled the steering wheel off and found a broke snapring. The book says it's the steeriing shaft bearing upper snapring. The rubber behind it is a little torn. Does anyone...
Bleeding brakes I get fluid out the rear wheel cylinders but I'm getting no fluid to the front calipers. What am I doing wrong Thanks to all that respond
When I removed the Brake Master Cylinder. There was old nasty grease on the pushrod that goes into the Master Cyl. Can I use any grease on the push rod or does it have to be a specific type. Thanks
My service manual says don't Bench Bleed Master Cylinder on car Where can I get the Kit to do this in my Vice. Or should I just get some Brakeline with fittings. Then make my own using some clear plastic tube Thanks
My 72 Dodge Coronet with Disc Brakes in front. I'm trying to find the correct brake pads. 2 sets from the autoparts store. They wern't machined right and wouldn't fit my Calipers. Where can I get Brake pads that will fit. Thanks