Search results for query: *

I am out of ideas with this. On my dad's '74 Cuda, the brakes will stay on when you press the peddle. You have to lift up the peddle with your foot to get it to come off. Parked at idle the peddle hangs up a little so that the lights are on, but going down the road it keeps them on enough that...

I took my Road Runner in for new front tires before getting the front end realigned. The tires were shot because I seem to have too much camber diled in. While at the shop the tech pointed out some endplay in the front wheel bearings and suggested I look at if I needed new bearings before the...

I was driving my car the other day and heard a clunk like something fell off the car. Turns out it was one of the bolts on the driver front caliper bracket bolts with the other being quite loose... The service manual says these are special nyloc bolts, but the bolt I have left has no signs of...

I am trying to do an at home allignment while the world is on fire and I can't go to a shop to get it done professionally. Ride height is set how I want it. I have the UCA adjuster all the way in on the rear and in the middle on the front yielding Driver side -1.2 camber, 1.2 caster (calculate...

I have been having issues with keeping my engine running and having it stall when stabbing the throttle and even after idling for a couple of minutes. I started clamping off vacuum hoses to see if I could find a leak. When I clamped off the hose for the brake booster the engine idle slowed down...

I was cleaning up my strut rods and found that one was bent and pretty upset around the shoulder on one end. How critical is that for steering and safety? Is this something I can correct by heating and bending? Does anyone have a one that is in good shape I could buy for a reasonable price?

I just bought a 9-1/4 sure-grip sans brakes for my 72 Satellite. Does anyone know if the 8-1/4 backing plate flange bolts are the same as the 9-1/4? (or the 7-1/4)? The '74 Chrysler service manual doesn't seem to indicate a difference in the flanges for any of the X-1/4 axles. It would be great...

Being just out of college and getting married in a year my small budget for my 72 Satellite build is getting smaller. Right now I am looking at purchasing suspension. (Drive train: 400-a/t ((I hope)), 3.23 open gear) Control arms -stock Torsion Bars - stock (P# 776, 777 I believe) Sway...