Search results for query: *

Our 1970 Dodge Super Bee power brake booster has just sprung a leak. Brakes are hard and takes both feet to stop. Who ha replacement booster ready to bolt in?

Anyone making these lower control arms?

What are the two u-joints used in the 60's and 70's and there measurements?

Are the disc brake spindles the same for the slider type calipers as the pin type calipers? The only difference being the caliper brackets bolted to the spindle!

Sorry for bumping into B bodies but who do you go to to find a stock proportioning valve for my Challenger with Disc front and drum rear

Can anyone give me the length of a drag link for my 65 Dodge Coronet 440 with power steering?

Where can I get just the tie rod end grease boots for my 65 Dodge Coronet?

Where can I get the rubber bushing that fits on the end of the M/C push rod to hold the rod into the M/C?

Where is the best place to put an adj. proportion valve on my 65 Coronet with manual disc brakes and 4 speed trans?

What is everyone using for a proportioning valve on their 65 Coronets? And does anyone have a picture of the rear-end hose connecting to the hard line on the body? There is nothing there, is there a bracket that holds the connection together?

Trying to find a grease boot on the pitman arm for my 65 Coronet with power steering. Everyone want to sell me a new arm at 90 to 100 plus. Can anyone suggest where to find and purchase this boot?

Is there a metal sleeve between the bushings? Just brought a new bushing set with sleeve but the sleeve will not slide over the rod. Inside Dia. is to small. Did the original set up not have a sleeve?

I have a 65 Coronet 440 that when finished will have a 440 engine with A/A's Max Wedge set up and exhaust manifolds in front of a 4 speed. Originally had a 273 auto. I'm asking what would be the proper torsion bars and rear springs for this set up? Intended for a nice cruiser with a little heavy...

Can I use the disc brake set up from a 1973 Dodge Dart on my 1965 Dodge Coronet?