Search results for query: *

Good Day All, What am I missing here...68 Bbody Spindles....the description from DMT says it fits ""66-72 A, B, C and E bodies. Small 1-1/2" spindle hole. Have another listing for large 73-76 spindles with 1-7/8" hole"...

Good Day, I see two styles idler arms listed for 68 Charger...one is straight with no curve in it when looking at it from above as if installed....and another that has a slight curve in it again when looking at it from above. I see the same thing in new parts as well as old NOS parts. The...

Good Day All, A quick question I cannot seem to find the answer too... The Idler arm...is there a grease cup that goes on the end of the idler arm that bolts into the center link...or is there just a "foam washer" that goes between the arm and center link? It seems I have seen both in...

Good Day all, Moving into rebuilding my front brake assembly. Would like to go back to as close to original as possible. I have local supplier than carries tons of older nos parts so hoping to be able to piece it all together. I have many questions but will try to make them as simple as I...

Good Day All, Any experts able to decode these numbers? Date Code? Part Number years applicable? Thx

Charger Parking brake.... Are there any gaskets that go on the 2 bolts that secure the parking brake to the firewall? It looks as if in Mopanations build thread there are 2 white foam gaskets maybe? Where can i find these? Looked at DMT but maybe i missed them in one of the sets...

Am I missing something? What is the difference in these 15/16 sway bar bushings from CI? Is there better ones available? A place to get stock like rubber ones? https://www.classicindustries.com/product/mn41105g.html https://www.classicindustries.com/product/55129g.html

As the title says....what diameter polyurethane bushings am I looking for to replace the original bushings inside the brackets? Were there different size diameter sway bars from the factory? Thx

Good Day All, As the title says....for my 68 Charger RT The kframe to Rad support bracket was missing from the car I purchased. I picked up the correct bracket and the proper fasteners. When I went to install it...I see now why it was not installed. The bracket will not go up far enough...it...

My car had a bit of a “rattle” in the back. Like something loose in the trunk. After some investigation I have determined that on the passenger side, one side of the rear shock crossmember has come apart from the frame rail. I put a piece of clear rubber hose in the crack to stop the...

Anyone have a technique or easy way to press them out? Cheers Macdon221

My apologizes if there is a complete thread on this. I looked but did not see a sticky or a complete thread on it. Pecking away at getting my 68 charger up to snuff. What is the color finish for all the rear suspension parts? Springs....Black or Metal finish it varied Front spring...

Hey All, Looking for the correct part numbers to get a set of Bilsteins front and rear for my 68 Charger. It seems everyone thinks these provide the best ride. I have read numerous threads and I have gotten different part numbers. Also the prices for the same application seem to be all over...

I have the original springs on my 68 Charger. They bear the numbers 2539964 and 2539794. I want to remove them to clean them up. I also want to remove whatever is not painted and/or finished correctly and do it correctly as per original. The shocks are more than 15 years old, so while i was...