• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. A

    Front Disc Conversion - prop valve/distribution block/residual pressure valve

    In the process of getting my 69 Super Bee back together and decided to upgrade the front brakes. Engine is currently out so trying to get everything sorted while I have the added room to work. I think I have it figured out but wanting to have my plan looked over. Old setup - 4 wheel 11" drum...
  3. A

    QA1 Upper Control Arm bushings

    Stupid question - can anyone tell me if the bushings in the QA1 upper controls arms are supposed to move with the arm or does the arm move around them?
  4. A

    LCA Lower Control Arm Bushings Moog vs Proforged (rubber)

    Going through replacing the LCA bushing on my super bee and bought both Moog (K791 $10.21) and Proforged (115-10015 $14.44) Open to any positive or negative experience with either, however it's probably splitting hairs and either one would work fine. Proforged is made is Taiwan, Moog is made in...
  5. A

    Green bearing end play

    How much, if any, end play should green bearings have? I noticed with the rear wheels off the ground I can rock the wheels a small bit (up/down and side to side), after pulling the axles out and putting a dial indicator on the side of the outer race I have .010" on both sides. Video below.
Back
Top