Search results for query: *

Need some assistance on identifying this power steering pump. Also, can anyone tell me if the bracket is complete? Wanting to use it on a 383. Thanks .

I'm still wrestling with a suspension issue on my 65 Satellite. As posted in a previous thread I can't maintain the ride height adjustment. After adjustment the right side "sags" or lowers itself almost to the bump stop no matter how much I adjust the bolt. The torsion bar cross member is...

What's the effects of putting the torsion bars on the wrong side? Example: The right one on the left side and visa versa. Thanks

Installed new lower control arm bushings and the old torsion bars and had the front end aligned. Prior to alignment I adjusted the ride height. After a day or so the right side becomes lower than the left. I've readjusted the torsion bar on that side but it continues to "lower itself". The...

I'm about to reinstall the rear axel assembly and the rear leaf springs (stock from the car) and forgot to mark which spring was on which side. Is there a difference between right and left? I did a search but didn't find an answer.

Pressed the bolt into the bushing (new) it’s not tight...can turn the bolt in the bushing by hand. The bushing is installed in the control arm. Do I need to replace the bushing? Bolt? Thanks

I have two 741 case 3:23 open third members I’m going to list on Craigslist here in central Florida, both are in excellent condition. What’s a fair asking price (each). They are the case and gears. Thanks

I've rebuilt the power steering pump....should the steering gear be flushed? If so how is it done?

Seems like a lot of activity regarding conversions recently....I've purchased a kit which I believe is made up of Right Stuff components... My conversion (64 SF) is to manual disc/drum my question regards the proportioning valve. Currently I have the stock "union" block that provides pressure...

Am in the process of converting my 64 Sport Fury from drum to disc. It came from the factory with power brakes. I've read different thoughts on keeping the power or converting to manual. I'm about to order a the master cylinder and proportioning valve (some call it the pressure valve) and am...

Has anyone used this kit? http://www.ebay.com/itm/371891713549?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Bought the Pro Comp short leaf spring helpers to install on the rear of my 64 Sport Fury. No instructions were included.... I've done a search but haven't found any on this forum. Anyone know where I can find a set. Thanks

A friend of mine has a brand new pair of Super Stock springs part numbers P3412002 and 003. In the part number search it shows these are for a 3,000 pound car. He's offered me a great deal on purchasing these. I have a 64 Sport Fury with a specified weight of 3215 pounds. I'd like to use...

Am thinking about installing a front swaybar on my 67 Satellite 440 automatic. Originally a 318 car have replaced torsion bars recommended for 440. Found this kit anyone know anything abt it? Thanks. This same post in engine forum by mistake...

At idle the front wheels slowly turn to right without touching the steering wheel. Any thoughts?

Which way do the offsets go to the front of the car or to the rear? It's a 67 Satellite. Thanks.

Installing new brake shoes on my 67 Satellite. The shoes have different lengths of lining attached to the shoe. Which one goes towards the front of the car? Thanks

Don't recall when I pulled the box what the clearance was between the box and the inner fender panel...The business card is tight...is this normal? Thanks..