Search results for query: *

I am trying to run 70-72 b body two pin Kelsey hayes calipers on my 68 roadrunner. The calipers need to be mounted on the rear of spindle to clear the sway bar but then the hoses point towards the front and have no chance to meet up with the hard lines at the frame. I see in one post someone...

Recently built a stroker with lower vacuum for my charger and am thinking of switching to manual brakes. I have front disc and rear drums with the 15/16 bore master already, so I believe all I need is the firewall stiffening plate for manual brakes and the rod that goes from the pedal to the...

OK I have what I believe to be a TRW pump on my Charger. I bought the brackets from Megaparts to use this pump and it doesn't really fit that well. I had to dent the reservoir in two spots on the back to clearance it and oblong the holes. The pulley still doesnt seem to line up that well. ANyone...

Hey all, so I have a 68 Runner with manual drums all the way around. I am starting to feel my drums get warped and am thinking it is time to upgrade to front discs. I can get the spindles, bearings, hardware, calipers, and rotors for $500.00. Seems like it's the time to do the swap. I am seeing...

Hey all, when I apply the brakes on my Charger (power front discs, rear drum) the fronts will hold on after I release the pedal. Its like a 4 or 5 second delay and seems to be getting worse. Sometimes it will not do it but most of the time it happens now. I noticed the engine running hotter...

I have a Chrysler power steering pump on my 68 Charger and need to rebuild the main housing gasket and front seal. Anyone know if the "Chrysler" power steering pump encompasses both the TRW and Federal pump types as far as seals go? The TRW has the different back housing but looks the same...