Search results for query: *

Interesting coolant article (attached). I know we all use 'green' conventional coolant in our B Body cars, but sometimes the daily drivers need coolant or coolant flush/replacement. I work for a auto parts chain store, and we carry not only SIX colors of coolant, but some of the colors are...

Putting vintage air on my 1967 coronet. I'm just not getting how the alternator bracket is mounted. In my scenario I have a belt dedicated to the fan, then two belts that drive the compressor and alternator. I scrolled through @Kern Dog excellent thread on vintage air installation, but not...

I have followed @Kern Dog excellent step by step AC install threads (68 and 70 B Body installs), but wondered if anyone tackled a 67 B Body for Vintage Air. My kit ships tomorrow and I've been quickly reading through the instructions on line. About the only item that seems intimidating is the...

Hello: I have a 1967 Coronet that has an AC leak. I put a can of DYE in the system and found it sort of sprayed downward under the area circled in the photo. Hard to tell if it leaked at the fitting or crimp. Not sure what to do next here. Appreciate any advice. Thanks.

My neighbor found 9 12oz cans of R12 is his workshop. He asked me to see if anyone could use it. He said to make an offer. Located in Tucson.

Received my 26 inch speedcooling ECP radiator tonight. Looks nice, but fitment will take some work. The battery tray is hitting the shroud flange, and the passenger side flange is hitting the lip of the inner sheetmetal. Also, the mopar stock shroud has no holes to align. I'll have to drill all...

Hello All: I have a Champion aluminum radiator which has sprung a minute pin hole leak near the front center. Small area that gets wet and discolored about the diameter of a dime. Not many radiator shops left around Tucson, but I will call on Monday. Any suggestions is appreciated.

Buying a Milodan 180 thermostat from Mancini. Any opinions on which gasket to buy? http://www.manciniracing.com/suthhoga1.html http://www.manciniracing.com/suthhoga.html Thickness is 0.090 and 0.047, so I lean towards the thicker gasket as I'm ignorant about the materials good, or bad...

I was at a car show Saturday night and there were two 1970 B Bodies there with shrouds similar to this item: https://www.summitracing.com/parts/spe-4348/overview/ I also saw on the other thread (underhood heat) that someone recommended the Summit shroud. I have a Champion aluminum radiator...

My 68 Road Runner has a Champion aluminum radiator, or at least I think it is a Champion radiator by it's cap? I run a tick under 195F all the time, so I'm not worried about overheating. In fact a infrared thermometer showed 189F on the upper hose and 135F on the lower hose, so things are good...