Search results for query: *

Running NGK BKR5EIX-11 plugs in a 440 with 440 source heads, hydraulic roller cam, Edelbrock performer RPM intake AVS2 carb and Mopar distributor and a FBO box and stock exhaust manifolds in a 4 speed car. Plugs out of the box are gapped at .040, run them like that or re gap to .035

Anyone know the name of the company that sells a White and Blue box that has a built in rev limiter and eliminates the ballast resistor. I saw them advertised and should have wrote their name down plus the box number.

Issue solved

Has anyone installed the flame thrower 3 conversion kit into a Big Block electronic distributor, if you have what's the trick to get the vacuum pod to hook up to the new plate. It seems like the hole is too far to the outside edge and I cannot get it to assemble properly.

I installed a Flame thrower three in my 440 last year about this time and never got it running the module inside the distributor was bad and I couldn't set the rev-limiter so I called Pertronix and ended up sending the whole distributor back. 6 weeks later I get it back and no issues the rest of...

Has anyone changed out their #57 bulb side marker lights on a 68 or 69 coronet with LED's ? if so what brand and number bulb did you use

Just wondering if anyone has tried Denso spark plugs in a 440. If you have what number plug did you use and what was the results

Anyone running the Mopar Performance Distributor with the adjustable vacuum ? My nephew bought a 70 Cuda with a 440 and it has this distributor in it and he's been having issues with the car surging at cruising speed. It did have the vacuum hose hooked up and I had him unplug it and put a plug...

Has anyone installed the Pertronix 3 distributor in a big block. If so what exactly did you have to do with the Ballast resister. I gutted mine and put a jumper wire in where the resister wire was so do you leave it wired onto the coil or just remove the wire. The instructions are very vague...

Anyone running the Pertronix Flame thrower 3 distributor and coil in you BB's. If you are is there any issue with the Flame Thrower 3 coil ? Reason I ask is I put this system in my 68 340 Dart and the car had issues with the flame thrower 3 coil and ended up using a coil with a little more...

What are the pros and cons of running the Mopar P-3690732 constant voltage regulator on a street car with the Mopar electronic ignition, I heard without it running the electronic ignition you could burn out the control box then I heard you could boil your battery. Mopar claims race only, has...

Does anyone know who makes the Halo Headlights that will fit a 68 Coronet RT. Would really like to put a set in with a halo to match the cars color. I know Wranglers have the same headlights ( 7 inch round ) and there is all kinds of halo headlights for Wranglers but don't know if they would fit

Has anyone replaced their Mopar electronic ignition with a HEI distributor ? If so was there a noticeable performance gain ? Correct me if I'm wrong but from I have read most all HEI distributors do not require the Ballast Resister or the control box ( orange, chrome or what ever color you run...