Search results for query: *

So Ive posted a thread asking for schematics of the internal contacts of the 4 pole flasher due some qierd happeni gs after changing to all LED lamps and bulbs. I was convinced I had something crossed as when I would hit my brake only my front turn signals would come on, no brake lights. Now...

Does anyone have the schematics that shows the poles ( NO/NC ) configuration for a 67 w/ 4 pole flasher? Trying to do some troubleshooting and my freaking brain aint working...that or these LEDs are causing some major issues. I have the FSM tyat doesnt show anything but the terminals aint cant...

So I have a 6AL that worked fine last weekend. Went to the shop to button up everything after installing the inner springs. Went to start no fire, no error code, nada... I've triple checked the battery feed, the ground and the 12v switched signal everything is correct ( 12.5v). Red LED does not...

I need some help deciphering a couple of my plugs. So yesterday I pulled my plugs in order to replace the inner springs after breaking in the cam and there were 3 that some unusual patterns on them. It was like a perfect deciding line that parted the electrode, half of it had typical carbonate...

So I've completely rewired the car a while back and everything was working as it should with the halogen lights. I've changed out all of my lights to LED including the headlights which have halo driving and turn signals.Added no load relays to both turn signal and flasher. The problem since the...

With all of the cheap sending units and inaccurate gauge readings I was curious if anyone has ever used on of these and want to know if it's worth the cost? https://technoversions.com/MeterMatchHome.html

So I'm installing my new harness have most of my switches wired in but am either losing my mind or I have a bad switch. Can anyone tell me the contact positions on the switch? With the switch in the up position all contacts are open... in the down/middle ( off ) position I have continuity...

Anyone runnining this distributor with a Holley EFI? Pros -cons? I have the Terminator and am thinking about letting the system control timing and eliminate the 6AL all together...thoughts comments frim those that went this route would be appreciated Also curious about the size of the base...