• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. E

    MSD Ignition Boxes

    Hello, I am considering an MSD ignition box for use on the street. Not a radical application - prolly a 500+ horsepower 493" with a mid range mechanical cam. Back in the day I ran an MSD 6AL box. Now I see a couple of choices: the MSD 6AL, and the StreetFire. Both are multispark and include...
  3. E

    Best Quality Mini Starter?

    Hello, I would like to hear from anybody who might have a favorite brand of mini starter. I have a big block and am using the common mini starter. It has failed after only a couple hours of use. It's a brand new motor, just getting tuned up and debugged. The starter was brand new and...
  4. E

    Chasing Ignition Problem

    Hello all, It's yet another electronic ignition question! I've got a new motor running on the Mopar electronic ignition system - all new coil, ballast, ignition box, distributor, and plug wires. I am fiddling with it to get it running right and probably have more than one issue going on...
  5. E

    How Much Vacuum Advance?

    Folks, I am running a mild 383 on the street with a Mopar electronic ignition. Compression is 8.5:1. I have found that the engine likes 18 degrees of initial advance, with 18 degrees of mechanical advance. My question is, aside from checking for ping at light throttle, how much vacuum...
  6. E

    Coil for Mopar Electronic Ignition?

    Hello, I have installed the Mopar electronic ignition kit on my '68 383 and am chasing a problem. At first it runs fine, but once it warms up it starts to stumble and waver at idle. I have a few things to chase on this issue, but one of them may be the coil. I am using a cheapo no-name stock...
  8. E

    3 Speed Wiper Motor Question

    Hello all, I have a '68 Coronet and would like to switch from the 2 speed wiper system to 3 speed wipers. I see a lot of 3 speed wiper motors out there, most of which need some serious TLC. Here's my question - I don't care about originality, but would like to know what years would fit &...
  9. E

    '68 Big Block Distributor

    Hey folks, Got a quick question. I have a stock distributor from a '68 383. Upon pulling it from the block, I see there is a thin flat steel ring that serves as a "gasket" between the distributor and the block. There is, however, no o-ring, nor is there a groove in the distributor body to...
Back
Top