• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. C

    Reluctor issue

    I’m changing the reluctor and pickup in the dizzy. The new roll pin seems too small. It won’t fit tight in either the reluctor wheel or the slot in the shaft, although it seems to be not as bad in the shaft. Has anyone seen this and how did you deal with it?
  2. C

    I need help from you MSD guys

    With the key in the on or run position I have no power on the positive wire on the coil. There is power going from the switch to the MSD box, it’s the top red wire on the left side of the plug. Is the box shot or could there be something else? This box doesn’t have very many miles on it. I think...
  3. C

    Question about the Sun tach

    Can someone tell me which wire is the signal wire? Black is ground and white is the light. That leaves power and signal. Shouldn’t they both be insulated? Shouldn’t the signal wire be green?
  4. C

    What’s this wire for.

    68 Charger rewired with a quik wire kit. What is the purple wire for? It’s on the back of the tic tic tach. It runs up to the distributor but ends in the open, not connected to anything. The car has an MSD in it. Would that wire have connected to the original distributor?
  5. C

    Grounding issue

    After removing and replacing the instrument cluster the right turn signal doesn’t flash. So I pulled the light out and made a ground with my test light probe on the metal tabs of the socket and it works. So definitely a grounding issue. Took a little sand paper and cleaned the tabs and cleaned...
  6. C

    Dash issues

    68 Charger. I removed the gauge cluster to replace the speedometer because it didn’t work. I put things back together yesterday and now I have these issues. 1- Headlights work but doors don’t open. I checked vacuum lines and they are attached. 2- four ways work but right turn signal indicator...
  7. C

    What’s this switch

    68 Charger. Is this the emergency brake switch? If so how is it wired?
  8. C

    Circuit board testing

    When I bought my 68 Charger it came with a lot of extra parts including a circuit board. Is there any way to test it to make sure it's good?
  9. C

    What’s this switch?

    This is a two position switch. Number 2864005 51515 0849 The nine is hard to read but I think that’s what it is. What’s it for?
  10. C

    Wiper switch

    How many switch positions are there on a three speed wiper switch? Or, does a two speed switch have four positions? I sold and shipped a four position switch to a guy and now he’s claiming it’s only a two speed. This is from a 68.
  11. C

    Switch numbers question

    68 b body - Light switch numbers are 2864134 36033 then 0 5 4 7 Is the 0 5 4 7 the date code, as in Feb 23/67? Wiper switch numbers are 2864014 23199 then 2678 Again, is the 2678 the date code? That would put it at Sept 24/68. A little late for a 68 car.
  12. C

    Anyone familiar with Quik Wire

    What is the switch on the bottom of this box for?
  13. C

    Argh! Some idiot....

    Last year I bought a 68 Charger that was redone. I was crawling around this thing today researching gremlins. There are three wires coming off the NSS, one brown and two black that are wrapped in electrical tape. I can follow it up the firewall to the top and viola, no brown wire! No wonder the...
Back
Top