Search results for query: *

I am in need of some explaining on distributor mechanical and vacuum advance springs. On the mechanical springs: Do the springs limit the actual amount of mechanical advance, or when the advance comes in/how fast or slow it does? On the vacuum advance (VA) springs: Does the spring limit the...

Hello all, I re-installed the original cast iron dual point distributor on my 67 GTX. It is a 440 4-speed car. When going through the FSM specifications, it does not give any specs for a dual point. The tag on the distributor says: CHRYSLER 2642911 IBS-4006-Y 67 Does anyone have any info on...

Tried to get the dual point dizzy going in my 67 GTX 440 today, but had no luck. I used all NOS parts, and cleaned and made sure they didn't have any corrosion on them. I was able to get 29 dwell on one set of points, and the car ran, but rough. Could not get the car to run on the other set of...

The other day, out of no where my temperature and gas gauge, in my 67 GTX pinned full right after start up. They eventually went back down, but they definitely pinned. Does this sound like a bad voltage regulator on the cluster itself, or just a loose one?

Voltage at my headlights (could only check high beams) are only at 7 volts, causing them to be very dim. I have begun troubleshooting. The headlight switch is removed, so that is removed from the equation. I found the two power terminals in the headlight switch plug, and jumped them till...

Does anyone know where I can find a new headlight switch for my 67 gtx? The one that I can get through year one appears to be made by standard, and I've learned from past experiences that it is not a direct replacement. Those required the stock knob/rod to be shortened in order for the knob to...

Hey Guys, I recently found out that the mopar dual point distributor has a different cap then the typical single point or electronic ignition distributors. Does anyone know of a good place to get these caps? Besides eBay. Are they remanufactured? Thanks!

I am trying to locate the part that I am pointing to with a red arrow in the picture. Is it the plastic insert that holds the screw for one of the headlight bucket adjustments. Does anyone know what this part is called, and where I can buy them?