Search results for query: *

Made a post, awhile back, about maybe a 'special' 64:blah::blah:, and an old boy, that has a bunch of 64 parts. Nada. Not seeing it, for now anyway. The guy with the 'special'...a :mad:car/parts hoarder, as far as I'm concerned. Real proud of his personal junkyard. Guy is retired, so not busy...

Was the original black liner felt, or mohair? Mine, on the driver's side, is now in a wad.:BangHead: Didn't redo either of the rear channels, since they looked fair. Gonna pay for that one.

Just curious. 64 Savoy post car. An old boy, think he's older than me, stopped by my shop yesterday. He had stopped by, a few years back, to look at my 64 SF. Tells me he lives only a few miles down the road. Anyway, he came by, to tell me about the project 64 Savoy post car he just bought...

Figured I'd ask here, from those running one of these cars. 64 Sport Fury, with most of the normal upgrades...later disc spindles, radial tires, and so on. Numbers on the radial tires chart work for you? Mine wanders, so going to re-do what the alignment shop screwed up. Just curious what's...

On my 64, above the rear axle, have two holes in the underside body plate. Don't remember taking plugs out of those. Should there be body plugs there??

Anyone with a 64 Plymouth, have one of the optional glovebox lights installed? The owner's manual mentions it, but no details, and don't find it in the parts book. Have a good idea what the button switch looks like...have a nicely rusted one. But, nothing on the light socket itself, or where it...

Any chance someone has a BAD 64 turn signal switch, I might buy from them. Doesn't even need any wires. I'm looking for one of the brass contacts, that are inside the switch itself. Probably going to call Joe Suchy, to see if he has any of those small parts. (Right now, he's out of the...

Does anybody know, what kind of aluminum coating, is used for the base color? Paint, or something else? Thanks, all.

Can anyone tell me what kind of lube is used on a speedometer, and where on the gauge it goes?

For a 64 Sport Fury...are they that rare? The three piece emblem. The two outers were already missing on my car. Any chance, anyone know where they can be found, or somebody with spares.

Gotta ask... 64 Sport Fury, auto console shift. When I got the car, console (or, what was left of it) was in the trunk. So, needed a complete redo. Question is, on the center trim pieces, that go front to back over the top. Is there supposed to be a trim piece up front? Asking because, when I...

Any leads where to look for ones that fit... Asking any of the 62-65 guys running a crossram, but fitted with Eddys, instead of AFBs. Understand the carb tops are different size, Eddys vs AFBs. So, even if I could afford the MW cleaners, they won't fit. Just wondering what you use?

Any kind of reference on that? Drawing, or maybe a photo. Just want to see the correct way it links up on the bellcrank. Yeah, know it takes it's own rod...something I've got to pick up. And, will that rod fit right, at the bottom end, on a later (67) 727?

Any 64-65 guys use that unit? If so, any issues, or do they act like the 'other' after-market unit. Just want to know if they read right.

Has anyone had any success in tightening loose crank knobs? Looks like some kind of rivet that holds them in place, and makes the pivot. My cranks are in good shape, except the knobs being somewhat loose.

Anyone has a copy of the 64 Plymouth B body auto trans console wiring diagram? Have the basic 64 wiring diagrams. One for the console(s) no, since their separate. I do have the full set for 65's. Would like to compare the differences between the years, even if it's just wire colors. If...

Had picked up a set of re-chromed bumpers for my 64 Sport Fury. Decided time to mount up the rear one. 'Should' have been a slap on deal...hell no. Can anyone with a 64 Savoy, Belvedere, Fury, or Sport Fury measure the distance on one of the inner mount bolts, to the outer. Either side...

Over at the 62 to 65 Mopar website, there's an article on making a fuel pump heat shield, out of aluminum. Anyone try this, and does it help? Sure, it's only a hit against heat soak at the pump, but from looking at the hot fuel issues... Looking at using a Carter mech pump. Though, not...

Gotta ask on this. Looking at 440 Magnum left-side exhaust manifold, that came on my motor, I'm building up. Going in my 64 Sport Fury...stock location using the K-member. Okay. Right-side manifold is correct (for the motor)...2806900. Left-side manifold is a 2863409. Is there any advantage...

Gonna stop banging my head on the wall. Looking for any hints. 64 Sport Fury. Stock BB K-frame. 440 going in the hole (Just another 440 post). I'm looking at a 1/2" hemi pickup tube, since I needed to clear the rust out of the port. Prefer finding a 5-6 quart pan, but don't know the drop...