Search results for query: *

what year lower control arms are compatible with a 64 B body?

i have a 64 440 with a 318 poly. Original manual steer car that was converted by PO at some point to power steering using a stand factory Mopar box. I’m looking at headers for the poly but none clear the power steering box. Heck, there is barely 1/8 of an inch now between the factory manifold...

I picked up a set of a 73+ B body disc brake spindles and brakes. Its not a full kit, I'm looking for a master cylinder, lines and prop valve. My questions are, should I get the lines from say a 73 charger? Also, master and prop from the same? And if I'm gonna go rob all that, should I grab...

my bench seat in my 440, well its toast, foam wise and covering. Been trying to find replacement foam and covers online, but no one seems to carry them for the standard bench. Other than a custom job, I'm thinking it might be best to simply find a driver quality bench to replace it. Anyone...

Does any aftermarket company make a direct plug in replacement harness for a 64 440 or other 64 b body? Looking for a complete, undamaged, unhacked and unmolested, chassis wiring harness for a 1964 4 door 440, polara, I think a 330 harness might work as well. Need it complete from tailights...

anyone know where I can get a new replacement speedo cable for a 64 polara 727 push button?

if so, I need some trim parts

I know I've heard of the special u-joint that allows you to mount a small yoke driveshaft to the larger size ujoint on the the 489 case. Does any one have the part number for that? and will it fit on a 64 ball and trunion shaft

Anyone know where I can get new/replacement lifters for a 64 318 poly? Solid, Mechanical lifters.

my 64 has a 727 pushbutton, currently a poly 318. I have a rebuilt 440 I'm considering swapping in IF the poly isn't in good condition when i get around to trying to fire it up(having to rewire the car first). Been trying to locate a 64 727 pushbutton big block transmission to no avail. Is it...

I've been trying to search out replacement/upgraded rear leafs for my 64. Seems nobody sells them. Does anyone know where I can get them? i've checked PST Hotckis Firm Feel Just Suspension Summit Racing Jegs Mancini Racing

What year did they stop using the tapered 8.75 rear axles?

I'm needing a new set of upper control arms for my 64 polara. I'm not wanting to go tubular unless there's no other options. My question is, what other years/model control arms will interchange with the 64 polara's?

Does anyone have the dimensions for the subframe and such for a 64 polara? Or know where i can find a chassis manual online for one?

Just curious, on a 1964 polara 440 package, what is the maximum tire size using a 15 inch rim that I can fit under the front and under the rear without tubing or cutting the fenders. I'm no opposed to rolling the lip under the car.

my 64 polara was converted to electronic ignition years ago by the previous owner. shortly after he did, it caught fire and melted the main harness. So I plan on replacing the entire chassis wiring harness and converting back to points. However, I want to see if i can make the poly 318 run. I...

This may be a dumb question, but is there a specific exhaust manifold used for 64 B bodies for say a RB engine??

I have a 64 polara with the 8.75 rear. I know there was something different about the 8.75s from that year but I'm drawing a blank as to what. so my questions are: 1: What is special about 8.75s from that year? 2: I have a working spare 489 suegrip from a 8.75 with 3.23s, the current carrier...

Does anyone know if the intakes are interchangable between years on the 318 poly, like can you put a late 50s intake on a 64?