Search results for query: *

Can someone confirm the wire that hooks up to the reservoir pump on a 69 Coronet ? I believe it’s solid brown and most likely the same on all models. Thanks

Is it still on schedule for July 10-12 ?

First, I’m not looking for anything over a couple hundred dollars. I’m particularly looking for a motion sensor alarm that notifies activation to an I phone. I bought a cheap motion sensor alarm several years ago that I loved at a previous residence. It was loud as hell. Made by a company called...

I’m looking to replace my chambered mufflers. They sound ok, but drone quite a bit at times at low rpm. About 1500-2k rpm during take off only. I want a short body muffler that won’t kill a loping cam sound and not drone under acceleration. I was thinking of this Dynomax. But, I’ve seen people...

I felt like sharing this. A lot of you may have experienced something similar. On a drive today. I pull up to a stop light. It was not a typical 4 way intersection. As I’m sitting there, a guy that appeared to be his late 50’s/ early 60’s approaches me from the other direction in a tow truck. He...

If anyone has 235/70/15 or 235/65/15 tires on a 68/69 B Body can’t you post a couple pics of your car ? Thank you

If you want to replace fusible link. Can you just add an inline blade fuse ? And what amp fuse would someone suggest ?

There are 2 springs inside an original distributor attached to the counter weights. One is larger or thicker than the other. I’m looking for that smaller spring. If anyone has an old original distributor not being used and is kind enough to help me. Please message me. Thank you

Thought Id share

This is the clip that holds the end of the rod to the transmission lever kick down on a 904. After it’s slipped into the lever hole. It slips onto the rod and keeps it in place. I’m in the process of replacing a cable with the original linkage. Hoping someone would be so kind to help me. I don’t...

We’re any 68/69 Roadrunners built with small blocks/904 transmissions or were they only originally big block cars ?

2 seconds into this video there is a picture of the kickdown linkage attached to the carburetor linkage stud. I know this video is for 71. But, All small blocks are the same. The spring in that picture extends toward the firewall. Where does the other end of that spring attach ? If possible post...

Im trying to hook up to an ignition power source for a gauge. Looking at the fuse block directly into the glove box. Is the ignition wire fuse the 2nd from the left on a 69 Coronet ? I can’t quite tell. My letters on the block are rubbed off.

And I’m not talking about females. Well maybe, females too. What do you guys do to find quality made fuel hose today ? I put a 3/8 inch fuel hose on my low pressure / power steering gear box about 6 or 7 months ago. The heat, which couldn’t have ever been very high. Because my car never over...

I have about 1.5 negative camber. Top of tire leaning in that much. My tires are starting to wear in the inside at a faster rate. I have aftermarket QA1 upper control arms. I’m going to try to straighten out the camber myself. If I make it worst or can’t get it right. I ll take it to a shop. I...

Which exact wire under the dash, is a good one to use as a memory power source for an aftermarket stereo ? In order, to not lose stereo preset functions, time, etc.

I realize where these exhaust tip hangers are mounted on frame. But, how do you anchor the bolt in the frame hole ? Is there a certain type of speed nut that attaches to frame to allow you to anchor the bolt ?

Several months ago I came across a production numbers chart for all 69 model Coronets. I thought I saved that to my phone. But, obviously didn’t. I can’t find it anywhere on line now. Does anyone have this chart they can post ?

Would someone be so kind to confirm the correct low pressure return hose size that is clamped onto a 68/69 power steering valve body to pump. I believe it’s 11/32, but I’m not positive. I’m going to try using a hydraulic hose and a correct style squeeze clamp. Rather than a fuel hose and screw...

I want to change my automatic tranny mount and fix the bearing access plate leak. Can you remove the cross member without removing the exhaust, if you slide the cross member toward the doors. Then, drop one end to slip the crossmember past the exhaust. Id like to know, before I attempt to fight...